Project-Insanity

Site Tools

Trace:
pi-homeserver

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
pi-homeserver [2022/11/18 00:45] – [Hardware] 10.100.0.1pi-homeserver [2022/11/23 20:42] (current) – [Benchmarks] 10.100.0.1
Line 1: Line 1:
 ====== Hardware ====== ====== Hardware ======
-  * Mainboard: Odroid-H2 [[https://wiki.odroid.com/odroid-h2/hardware]]+  * Mainboard: Odroid-H2 Rev B+ [[https://wiki.odroid.com/odroid-h2/hardware]]
     * CPU compare with Odroid-M1 [[https://www.cpubenchmark.net/compare/ROC-RK3568-PC-HDMI-(Android)-vs-Intel-Celeron-J4105/4752vs3159]]\\     * CPU compare with Odroid-M1 [[https://www.cpubenchmark.net/compare/ROC-RK3568-PC-HDMI-(Android)-vs-Intel-Celeron-J4105/4752vs3159]]\\
  
-  * Memory: 260Pin SO-DIMM 8GB DDR4 2400 CL14 1,2V, 1×Riegel vorhanden: "HX424S14IB2/8" https://www.kingston.com/de/memory/search/discontinuedmodels?partId=HX424S14IB2%2F8 via 2. Slot (max 2×16GB DDR4)\\+  * Memory: 1×260Pin SO-DIMM 8GB DDR4 2400 CL14 1,2V: [[https://www.kingston.com/de/memory/search/discontinuedmodels?partId=HX424S14IB2%2F8|HX424S14IB2/8]] 2. Slot available (max 2×16GB DDR4)\\
  
   * 8GB eMMC 5.0 (read rate ~130MB/s)\\   * 8GB eMMC 5.0 (read rate ~130MB/s)\\
  
-  * //some M.2 PCIe 2.0 x4 card// (supports NGFF-2280 cards, not compatible with M.2 SATA SSD) +  * M.2 PCIe 2.0 x4 slot (support NGFF-2280): Kingston [[https://www.kingston.com/en/support/technical/products/snvs|SV1 NVME 250GB]] (not compatible with M.2 SATA SSD) 
-  * //some HDDs (1x 12TB will be connected)//+  * //some HDDs (1x 12TB will be connected, 2 SATA-Ports available)//
  
 ====== Powerconsumption ====== ====== Powerconsumption ======
Line 18: Line 18:
 For booting fom emmc: XHCI enabled For booting fom emmc: XHCI enabled
  
 +===== NixOS crypt setup =====
 +Encrypted NixOS via standard installer by Nov.2022 (v22.05) but changed ext4 root filesystem to btrfs after installation.\\
 +Before reboot you can unmount the new installation-system partitions. Then you can simply convert the ext4-filesystem with
 +<code bash>
 +btrfs-convert /dev/mapper/luks-btrfs
 +</code>
 +With **blkid** you can get the new UUID for the converted logical volume and copy in hardware-configuration.nix file:
 +==== hardware-configuration.nix ====
 +<code bash>
 +fileSystems."/" =
 +    { device = "/dev/disk/by-uuid/d11cd5b3-8a41-42d0-b671-04efbdd8b18b";
 +      fsType = "btrfs";
 +      options = [ "subvolid=5" "subvol=/" ];
 +      neededForBoot = true;
 +    };
  
 +  boot.initrd.luks.devices."luks-btrfs".device = "/dev/disk/by-uuid/085ffcdf-5a5c-43fc-9231-eed8b5d0bbd4";
 +</code>
 +changed also 
 +==== configuration.nix ====
 +added here also (maybe not needed?)
 +<code /bash>
 +  boot.initrd.supportedFilesystems = ["btrfs"];
 +</code>
 +After changing the config, you have to run **nixos-rebuild boot** and **nixos-rebuild switch**
 +
 +==== Benchmarks ====
 +<code bash>
 +[picloud@picloud2:~]$ sudo nix-shell -p hdparm --run "hdparm -Tt /dev/mapper/luks-btrfs"
 +/dev/mapper/luks-btrfs:
 +
 + Timing cached reads:   8778 MB in  1.99 seconds = 4411.76 MB/sec
 + Timing buffered disk reads: 1032 MB in  3.00 seconds = 343.78 MB/sec
 +
 +[picloud@picloud2:~]$ sudo nix-shell -p hdparm --run "hdparm -Tt /dev/nvme0n1p2"
 +
 +/dev/nvme0n1p2:
 + Timing cached reads:   6826 MB in  1.99 seconds = 3426.54 MB/sec
 + Timing buffered disk reads: 1094 MB in  3.00 seconds = 364.46 MB/sec
 +
 +[picloud@picloud2:~]$ sudo nix-shell -p hdparm --run "hdparm -Tt /dev/mmcblk0p2"
 +
 +/dev/mmcblk0p2:
 + Timing cached reads:   8476 MB in  1.99 seconds = 4259.80 MB/sec
 + Timing buffered disk reads:   2 MB in  0.03 seconds =  74.21 MB/sec
 +
 +[picloud@picloud2:~]$ sudo cryptsetup benchmark 
 +# Die Tests sind nur annähernd genau, da sie nicht auf den Datenträger zugreifen.
 +PBKDF2-sha1       840205 Iterationen pro Sekunde für 256-Bit-Schlüssel
 +PBKDF2-sha256    1394382 Iterationen pro Sekunde für 256-Bit-Schlüssel
 +PBKDF2-sha512     542741 Iterationen pro Sekunde für 256-Bit-Schlüssel
 +PBKDF2-ripemd160  375564 Iterationen pro Sekunde für 256-Bit-Schlüssel
 +PBKDF2-whirlpool  273636 Iterationen pro Sekunde für 256-Bit-Schlüssel
 +argon2i       4 Iterationen, 604968 Speicher, 4 parallele Threads (CPUs) für 256-Bit-Schlüssel (Zieldauer 2000 Millisekunden)
 +argon2id      4 Iterationen, 601444 Speicher, 4 parallele Threads (CPUs) für 256-Bit-Schlüssel (Zieldauer 2000 Millisekunden)
 +#   Algorithmus | Schlüssel | Verschlüsselung | Entschlüsselung
 +        aes-cbc        128b       654,6 MiB/s      1433,1 MiB/s
 +    serpent-cbc        128b        49,9 MiB/s       150,8 MiB/s
 +    twofish-cbc        128b       106,7 MiB/s       120,6 MiB/s
 +        aes-cbc        256b       511,2 MiB/s      1222,6 MiB/s
 +    serpent-cbc        256b        50,0 MiB/s       150,8 MiB/s
 +    twofish-cbc        256b       106,6 MiB/s       120,7 MiB/s
 +        aes-xts        256b      1294,1 MiB/s      1293,4 MiB/s
 +    serpent-xts        256b       149,6 MiB/s       148,7 MiB/s
 +    twofish-xts        256b       116,2 MiB/s       117,3 MiB/s
 +        aes-xts        512b      1127,2 MiB/s      1131,4 MiB/s
 +    serpent-xts        512b       148,7 MiB/s       148,5 MiB/s
 +    twofish-xts        512b       115,8 MiB/s       117,0 MiB/s
 +</code>
pi-homeserver.1668732345.txt.gz · Last modified: 2022/11/18 00:45 by 10.100.0.1