Project-Insanity

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== host.pi ======
===== Specs =====
 1 x Dedicated Root Server SB32 (hetzner)
     * Intel Core i7-3770
     * 2x HDD SATA 3,0 TB Enterprise
     * 4x RAM 8192 MB DDR3
     * Location: FSN1
===== Payment =====
Serverkosten pro Montat: 26,89€ + 5,11€ Steuer: 32,00€
^                            ^ Arne         ^ Jonas          ^ ST           ^ Krischi     ^ Schitzu  ^
| Juni 18                    | 6,40/6,40    | 6,40/6,40      | 6,40/6,40    | 6,40/6,40   | 6,40/6,40   |
| Juli 18                    | 6,40/6,40    | 6,40/6,40      | 6,40/6,40    | 6,40/6,40   | 6,40/6,40   |
| August 18                  | 6,40/6,40    | 6,40/6,40      | 6,40/6,40    | 6,40/6,40   | 6,40/6,40   |
| September 18               | 6,40/6,40    | 6,40/6,40      | 6,40/6,40    | 6,40/6,40   | 6,40/6,40   |
| Oktober 18                 | 6,40/6,40    | 6,40/6,40      | 6,40/6,40    | 6,40/6,40   | 6,40/6,40   |
| November 18                | 6,40/6,40    | 6,40/6,40      | 6,40/6,40    | 6,40/6,40   | 6,40/6,40   |
| Dezember 18                | 6,40/6,40    | 6,40/6,40      | 6,40/6,40    | 6,40/6,40   | 6,40/6,40   |
| Januar 19                  | 0/6,40       | 6,40/6,40      | 6,40/6,40    | 6,40/6,40   | 0/6,40   |
| Juli 21 (vorausgezahlt)    | 0/6,40       | 6,40/6,40      | 6,40/6,40    | 0/6,40      | 0/6,40   |
Zu überweisen an Jonas
===== Überblick =====
^ Name        ^ IP           ^ IPv6                  ^ Space      ^ Last backup         ^  
| host        | 10.25.0.1    | 2a01:4f8:191:327::2   | 5.5TB      | pending (picloud)   |
| http        | 10.25.0.100  | 2a01:4f8:191:327::10  | 1TB        | 10.03.21 (picloud)   |
| http-pub    | 10.25.0.101  | 2a01:4f8:191:327::11  | 500G       | 24.03.21 (picloud)  |
| mail        | 10.25.0.102  | 2a01:4f8:191:327::12  | 500G       | 27.01.21 (picloud)  |
| mysql       | 10.25.0.103  | 2a01:4f8:191:327::13  | 100G       | 28.01.21 (picloud)  |
| playground  | 10.25.0.104  | 2a01:4f8:191:327::14  | 500G       | 29.03.21 (picloud)  |
| storage     | 10.25.0.105  | 2a01:4f8:191:327::15  | 1TB        | 28.04.21 (picloud)   |
===== Setup =====
  * IPv4: 144.76.16.40
  * IPv6: 2a01:4f8:191:327::2
Im Rescue system:
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
installimage -a -n project-insanity -b grub -r yes -l 0 -i root/.oldroot/nfs/images/archlinux-latest-64-minimal.tar.gz -p /boot:ext4:2G,lvm:vg0:all -v vg0:swap:swap:swap:3G,vg0:root:/:btrfs:40G -f yes -s en
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== systemd-networkd ====
on the installed host machine, had to change ''2a01:4f8:191:327::2/64'' to ''2a01:4f8:191:327::2/128''. Also ''Address=144.76.16.40'' to ''Address=144.76.16.40/32'':
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/networkd/10-enp3s0.network&amp;amp;amp;amp;amp;gt;
### Hetzner Online GmbH installimage
[Match]
Name=enp3s0

[Network]
Address=2a01:4f8:191:327::2/128
Gateway=144.76.16.33
Gateway=fe80::1

[Address]
Address=144.76.16.40/32
Peer=144.76.16.33/32
IPForward=ipv4
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/networkd/25-bridge.netdev&amp;amp;amp;amp;amp;gt;
[NetDev]
Name=br-internal
Kind=bridge
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/networkd/25-bridge.network&amp;amp;amp;amp;amp;gt;
[Match]
Name=br-internal

[Network]
Address=2a01:4f8:191:327::2/64
Address=10.25.0.1/24
ConfigureWithoutCarrier=true
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
==== core system ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S mosh tmux htop dmidecode fail2ban openvpn qemu openbsd-netcat openssh easy-rsa fish pacman-contrib
chsh -s $(which fish)
wget https://arch.jensgutermuth.de/iso/2018.06.01/archlinux-2018.06.01-x86_64.iso -P /var/lib/libvirt/images/
chown qemu:qemu /var/lib/libvirt/images/archlinux-2018.06.01-x86_64.iso
useradd -m onny -s /bin/fish
passwd onny
gpasswd -a onny sudo
gpasswd -a onny libvirt
sudo -u onny mkdir /home/onny/.ssh
sudo -u onny vim /home/onny/.ssh/authorized_keys
sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin no/g' /etc/ssh/sshd_config
sed -i 's/^#PasswordAuthentication yes/PasswordAuthentication no/g' /etc/ssh/sshd_config
systemctl enable --now sshd fail2ban systemd-networkd systemd-resolved
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
dnsmasq settings, ready to listen on wireguard subnet
&amp;amp;amp;amp;amp;lt;file - /etc/dnsmasq.conf&amp;amp;amp;amp;amp;gt;
[...]
listen-address=127.0.0.1,10.25.0.1,10.25.40.1

no-resolv

# Google's nameservers, for example
server=8.8.8.8
server=8.8.4.4
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
systemd resolved dns resolver settings
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/resolved.conf&amp;amp;amp;amp;amp;gt;
[...]
[resolve]
DNSStubListener=no
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/resolved.conf.d/dns_over_tls.conf&amp;amp;amp;amp;amp;gt;
[Resolve]
DNSOverTLS=opportunistic
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/resolved.conf.d/dnssec.conf&amp;amp;amp;amp;amp;gt;
[Resolve]
DNSSEC=true
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/resolved.conf.d/dns_servers.conf&amp;amp;amp;amp;amp;gt;
[Resolve]
DNS=2620:fe::fe 9.9.9.9
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/hosts&amp;amp;amp;amp;amp;gt;
[...]
10.25.0.1 host.pi
10.25.0.100 http.pi
10.25.0.101 http-pub.pi
10.25.0.102 mail.pi
10.25.0.103 mysql.pi
10.25.0.104 playground.pi
10.25.0.105 storage.pi

2a01:4f8:191:327::2 host.pi
2a01:4f8:191:327::10 http.pi
2a01:4f8:191:327::11 http-pub.pi
2a01:4f8:191:327::12 mail.pi
2a01:4f8:191:327::13 mysql.pi
2a01:4f8:191:327::14 playground.pi
2a01:4f8:191:327::15 storage.pi

#vpn clients
10.25.0.200      onny           onny.pi
10.25.0.201      st             st.pi
10.25.0.202      neutrino       neutrino.pi
10.25.0.203      arne           arne.pi

2a01:4f8:191:327::100 onny onny.pi
2a01:4f8:191:327::101 st st.pi
2a01:4f8:191:327::102 neutrino neutrino.pi
2a01:4f8:191:327::103 arne arne.pi
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
custom pi archlinux repo
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.conf&amp;amp;amp;amp;amp;gt;
...
[projectinsanity]
SigLevel = PackageOptional
Server = https://onny.project-insanity.org/archlinux
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
archlinux auto update
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.conf&amp;amp;amp;amp;amp;gt;
...
[projectinsanity]
SigLevel = PackageOptional
Server = https://onny.project-insanity.org/archlinux
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/autoupdate.service&amp;amp;amp;amp;amp;gt;[Unit]
Description=Automatic Update
After=network-online.target

[Service]
Type=simple
ExecStart=/usr/bin/sh -c &amp;amp;amp;amp;amp;quot;/usr/bin/pacman -Syuq --noconfirm --needed --noprogressbar &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; rm /var/cache/pacman/pkg/*.zst&amp;amp;amp;amp;amp;quot;
TimeoutStopSec=180
KillMode=process
KillSignal=SIGINT

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/autoupdate.timer&amp;amp;amp;amp;amp;gt;
[Unit]
 Description=Automatic Update when booted up after 5 minutes then check the system for updates every 60 minutes

[Timer]
 OnBootSec=5min
 OnUnitActiveSec=60min
 Unit=autoupdate.service

[Install]
 WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable --now autoupdate.timer
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
automatic timed reboot after kernel upgrade
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.d/hooks/linux.hook&amp;amp;amp;amp;amp;gt;
[Trigger]
Operation = Install
Operation = Upgrade
Type = Package
Target = linux

[Action]
Description = Enable timer for reboot after kernel upgrade
When = PostTransaction
Exec = /usr/bin/systemctl start kernel-upgrade.timer
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/kernel-upgrade.timer&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Reboot in the morning after kernel upgrade

[Timer]
OnCalendar=*-*-* 06:00:00
Unit=kernel-upgrade.service

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/kernel-upgrade.service&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Reboot after kernel upgrade

[Service]
Type=simple
ExecStart=/usr/bin/systemctl reboot

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
==== nftables ====
nftables firewall &amp;amp;amp;amp;amp;amp; routing
&amp;amp;amp;amp;amp;lt;file - /etc/nftables.conf&amp;amp;amp;amp;amp;gt;
define TCP_PORT_QUAKEJS_DS = 27960
define TCP_PORT_IMAPS = 993
define TCP_PORT_SMTPS = 587
define TCP_PORT_SMTP = 25
define TCP_PORT_SSH = 22
define TCP_PORT_HTTP = 80
define TCP_PORT_HTTPS = 443
define UDP_PORT_WIREGUARD = 51820
define UDP_PORT_MOSH = 60000-61000
define HOST_HTTP_PI = 10.25.0.100
define HOST_MAIL_PI = 10.25.0.102
define HOST_PLAYGROUND_PI = 10.25.0.104

table inet filter {
	set tcp_accepted {
		type inet_service
		flags interval
		elements = { $TCP_PORT_SSH, $TCP_PORT_HTTP, $TCP_PORT_HTTPS, $TCP_PORT_SMTPS, $TCP_PORT_IMAPS, $TCP_PORT_SMTP, $TCP_PORT_QUAKEJS_DS }
	}

set udp_accepted {
		type inet_service
		flags interval
		elements = { $UDP_PORT_WIREGUARD, $UDP_PORT_MOSH }
	}

chain base_checks {
		ct state { established, related } accept
		ct state invalid drop
	}

chain input {
		type filter hook input priority filter; policy drop;
		jump base_checks
		iifname &amp;amp;amp;amp;amp;quot;lo&amp;amp;amp;amp;amp;quot; accept
		ip protocol icmp icmp type { echo-reply, destination-unreachable, echo-request, time-exceeded, parameter-problem } accept
		ip6 nexthdr ipv6-icmp icmpv6 type { destination-unreachable, packet-too-big, time-exceeded, parameter-problem, echo-request, echo-reply, mld-listener-query, nd-router-solicit, nd-router-advert, nd-neighbor-solicit, nd-neighbor-advert } accept
		tcp dport @tcp_accepted accept
		udp dport @udp_accepted accept
		ip saddr 10.25.0.1/24 accept
		ip saddr 10.25.40.1/24 accept
		reject
	}

chain forward {
		type filter hook forward priority filter; policy drop;
		jump base_checks
		ip daddr 10.25.0.100 ct status dnat accept
		ip saddr {10.25.0.1/24,10.25.40.1/24} accept
		ip daddr {10.25.0.1/24,10.25.40.1/24} accept
	        oif br-internal accept
	        iif br-internal accept
	}

chain output {
		type filter hook output priority filter; policy accept;
	}
}
table ip nat {
	chain prerouting {
		type nat hook prerouting priority filter; policy accept;

iif &amp;amp;amp;amp;amp;quot;enp3s0&amp;amp;amp;amp;amp;quot; tcp dport { $TCP_PORT_HTTP, $TCP_PORT_HTTPS } dnat to $HOST_HTTP_PI

# Forward web traffic to http.pi
		ip daddr { 10.25.0.1/24,144.76.16.40 } tcp dport { $TCP_PORT_HTTP,$TCP_PORT_HTTPS } dnat to $HOST_HTTP_PI

# Forward mail traffic to mail.pi
		iif &amp;amp;amp;amp;amp;quot;enp3s0&amp;amp;amp;amp;amp;quot; tcp dport { $TCP_PORT_SMTP, $TCP_PORT_SMTPS, $TCP_PORT_IMAPS } dnat to $HOST_MAIL_PI

iif &amp;amp;amp;amp;amp;quot;enp3s0&amp;amp;amp;amp;amp;quot; tcp dport { $TCP_PORT_QUAKEJS_DS } dnat to $HOST_PLAYGROUND_PI
	}

chain postrouting {
		type nat hook postrouting priority srcnat; policy accept;
		ip saddr 10.25.0.0/24 oif {&amp;amp;amp;amp;amp;quot;enp3s0&amp;amp;amp;amp;amp;quot;, &amp;amp;amp;amp;amp;quot;br-internal&amp;amp;amp;amp;amp;quot;} snat 144.76.16.40
	}
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - nftables.service.d/overwrite.conf&amp;amp;amp;amp;amp;gt;
[Unit]
Wants=
Wants=libvirtd.service
Before=
After=libvirtd.service

[Service]
Type=simple
Restart=always
RestartSec=5
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S nftables
systemctl enable --now nftables
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== libvirtd ====
libvirt network configuration file
&amp;amp;amp;amp;amp;lt;file - /tmp/net-internal.xml&amp;amp;amp;amp;amp;gt;
network connections='6'&amp;amp;amp;amp;amp;gt;
  &amp;amp;amp;amp;amp;lt;name&amp;amp;amp;amp;amp;gt;internal&amp;amp;amp;amp;amp;lt;/name&amp;amp;amp;amp;amp;gt;
  &amp;amp;amp;amp;amp;lt;uuid&amp;amp;amp;amp;amp;gt;0a2dff47-afc7-4d27-91b0-5f61a1f5cbaa&amp;amp;amp;amp;amp;lt;/uuid&amp;amp;amp;amp;amp;gt;
  &amp;amp;amp;amp;amp;lt;forward mode='bridge'/&amp;amp;amp;amp;amp;gt;
  &amp;amp;amp;amp;amp;lt;bridge name='br-internal'/&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;/network&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
libvirt qemu hook
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S libvirt virt-install dnsmasq glusterfs
virsh pool-define-as --name 'vg0' --type 'logical' --source-format 'lvm2' --target '/dev/vg0'
virsh pool-autostart vg0
virsh pool-start vg0
virsh net-define /tmp/net-internal.xml
virsh net-start internal
virsh net-autostart internal
systemctl enable --now libvirtd
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;

==== wireguard ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S wireguard-tools
cd /etc/wireguard
wg genkey | tee privatekey | wg pubkey &amp;amp;amp;amp;amp;gt; publickey
chmod 600 privatekey
chown root:root privatekey
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/network/99-server.netdev&amp;amp;amp;amp;amp;gt;
[NetDev]
Name = wg0
Kind = wireguard
Description = Wireguard

[WireGuard]
ListenPort = 51820
PrivateKey = [PI_SERVER_PRIVKEY]

[WireGuardPeer]
# onny
PublicKey = [ONNY_PUBKEY]
AllowedIPs = 10.25.40.2/32

[WireGuardPeer]
# st
PublicKey = [ST_PUBKEY]
AllowedIPs = 10.25.40.3/32

[WireGuardPeer]
# neutrino
PublicKey = [NEUTRINO_PUBKEY]
AllowedIPs = 10.25.40.4/32

[WireGuardPeer]
# jolla (neutrino)
PublicKey = [JOLLA_PUBKEY]
AllowedIPs = 10.25.40.5/32

[WireGuardPeer]
# picloud (onny)
PublicKey = [PICLOUD_PUBKEY]
AllowedIPs = 10.25.40.6/32
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/network/99-server.network&amp;amp;amp;amp;amp;gt;
[Match]
Name = wg0

[Network]
Address = 10.25.40.1/24
DNS=10.25.0.1
DNSSEC=false
IPForward=ipv4
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
=== client ===
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S wireguard-tools
cd /etc/wireguard
wg genkey | tee privatekey | wg pubkey &amp;amp;amp;amp;amp;gt; publickey
chmod 600 privatekey
chown root:root privatekey
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/network/99-client.netdev&amp;amp;amp;amp;amp;gt;
[NetDev]
Name = wg0
Kind = wireguard
Description = Wireguard

[WireGuard]
PrivateKey = [ONNY's PRIVATE KEY]

[WireGuardPeer]
PublicKey = [SERVER PUBLICKEY]
AllowedIPs = 10.25.0.0/16
Endpoint = 2a01:4f8:191:327::2:51820
Endpoint = 144.76.16.40:51820
PersistentKeepalive = 25
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/network/99-client.network&amp;amp;amp;amp;amp;gt;
[Match]
Name = wg0

[Network]
Address = 10.25.40.2/16
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl restart systemd-networkd
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== systemd-journal logging server ====
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/journal-remote.conf&amp;amp;amp;amp;amp;gt;
[Remote]
SplitMode=host
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/systemd-journal-remote.service&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Journal Remote Sink Service
Documentation=man:systemd-journal-remote(8) man:journal-remote.conf(5)
Requires=systemd-journal-remote.socket

[Service]
ExecStart=/lib/systemd/systemd-journal-remote --listen-http=-3 --output=/var/log/journal/remote/
User=systemd-journal-remote
Group=systemd-journal-remote
PrivateTmp=yes
PrivateDevices=yes
PrivateNetwork=yes
WatchdogSec=3min

[Install]
Also=systemd-journal-remote.socket
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
mkdir -p /var/log/journal/remote
chown -R systemd-journal-remote:systemd-journal-remote /var/log/journal/remote
pacman -S libmicrohttpd
ufw allow from 10.25.0.0/24 to any proto tcp port 19532
systemctl enable --now systemd-journal-remote
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
===== ArchLinux Gastsystem =====
==== Erstellen ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
virt-install --video qxl --channel spicevmc --graphics spice,listen=127.0.0.1 --name=http --vcpus 4 --memory 8048 --disk pool=vg0,size=1000,bus=virtio --cdrom /var/lib/libvirt/images/archlinux-2018.06.01-x86_64.iso --network network:internal,model=virtio --virt-type kvm --autostart --noautoconsole
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== Löschen ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
virsh destroy http
virsh undefine http
lvremove /dev/vg0/http
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== Speicher vergrößern ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;virsh shutdown http
lvresize -L +20G vg0/http
virsh start http&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Auf dem Gastsystem ausführen:
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;sgdisk -og -a 1024 -n 1:1024:2047 -c 1:&amp;amp;amp;amp;amp;quot;BIOS Boot Partition&amp;amp;amp;amp;amp;quot; -t 1:ef02 /dev/vda
sgdisk -n2:2048:0 -c2:&amp;amp;amp;amp;amp;quot;ArchRoot&amp;amp;amp;amp;amp;quot; -p /dev/vda
shutdown -h now # then start again after that
btrfs filesystem resize max /&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Bei neueren Version von libguestfs-tools (&amp;amp;amp;amp;amp;gt;1.16.34) könnte man auch die Partitionstabelle und Dateisystem [[http://blog.oneiroi.co.uk/linux/kvm/virt-resize/RHEL/LVM/kvm-linux-expanding-a-lvm-guest-file-system-using-virt-resize/|von dem Host aus resizen]] und müsste dafür nicht das Gastsystem neustarten.

==== Backup ====
Raw backup logical volume to picloud (homeserver onnuex)
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
lvcreate -s -n playground_snap -L 20G /dev/vg0/playground
dd if=/dev/vg0/playground.img_snap bs=4096 | pv | gpg --batch --passphrase &amp;amp;amp;amp;amp;quot;my_secret_password&amp;amp;amp;amp;amp;quot; --symmetric --compress-algo zlib | ssh picloud@picloud.sexypump.de 'dd of=/mnt/backups/project-insanity/playground_$(date +&amp;amp;amp;amp;amp;quot;%Y-%m-%d&amp;amp;amp;amp;amp;quot;).img.gpg bs=4096'
lvremove /dev/vg0/playground_snap
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Recover backup
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
gpg -o /mnt/playground.img -d /mnt/playground.img.gpg
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Unfinished backup script:
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sas=&amp;amp;amp;amp;amp;quot;$1&amp;amp;amp;amp;amp;quot;
password=&amp;amp;amp;amp;amp;quot;$2&amp;amp;amp;amp;amp;quot;

for vol in `lvs | cut -f3 -d &amp;amp;amp;amp;amp;quot; &amp;amp;amp;amp;amp;quot; | tail -n+2`
	do echo &amp;amp;amp;amp;amp;quot;Backing up $vol&amp;amp;amp;amp;amp;quot;
	lvcreate -s -n &amp;amp;amp;amp;amp;quot;${vol}_snap&amp;amp;amp;amp;amp;quot; -L 20G &amp;amp;amp;amp;amp;quot;/dev/vg0/${vol}&amp;amp;amp;amp;amp;quot;
	pv -cN source &amp;amp;amp;amp;amp;quot;/dev/vg0/${vol}_snap&amp;amp;amp;amp;amp;quot; | gpg --batch --passphrase &amp;amp;amp;amp;amp;quot;${password}&amp;amp;amp;amp;amp;quot; --symmetric --compress-algo zlib | azcopy cp &amp;amp;amp;amp;amp;quot;https://myaccount.blob.core.windows.net/mycontainer/${vol}_$(date +&amp;amp;amp;amp;amp;quot;%Y-%m-%d&amp;amp;amp;amp;amp;quot;).img.gpg?${sas}&amp;amp;amp;amp;amp;quot;
	lvremove &amp;amp;amp;amp;amp;quot;/dev/vg0/${vol}_snap&amp;amp;amp;amp;amp;quot;
done
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== Einrichten ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
mkfs.btrfs /dev/sda
ifconfig eth0 10.25.0.120 up
route add default gw 10.25.0.1
mount /dev/sda /mnt
ln -sf /run/systemd/resolve/stub-resolv.conf /etc/resolv.conf
pacstrap /mnt base base-devel tmux mosh yajl wipe rsync procps neovim lsof strace htop net-tools pkgfile dnsutils iotop aria2 tcpdump nload grub btrfs-progs gptfdisk ntp wget rxvt-unicode-terminfo pwgen mlocate fail2ban pv expac openssh git devtools fish nftables ripgrep bat fd pacman-contrib
genfstab -p /mnt &amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;gt; /mnt/etc/fstab
arch-chroot /mnt
chsh -s $(which fish)
sed -i 's/^#?SystemMaxUse=.*$/SystemMaxUse=200M/g' /etc/systemd/journald.conf
sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin no/g' /etc/ssh/sshd_config
sed -i 's/^#PasswordAuthentication yes/PasswordAuthentication no/g' /etc/ssh/sshd_config
sed -i 's/^#Color/Color/g' /etc/pacman.conf
mkdir /etc/pacman.d/hooks
ln -s /usr/share/libalpm/hooks/30-systemd-daemon-reload.hook /etc/pacman.d/hooks/
echo &amp;amp;amp;amp;amp;quot;http-pub2&amp;amp;amp;amp;amp;quot; &amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;gt; /etc/hostname
ln -sf /usr/share/zoneinfo/UTC /etc/localtime
sed -i 's/#en_US.UTF-8/en_US.UTF-8/' /etc/locale.gen
locale-gen
echo 'LANG=&amp;amp;amp;amp;amp;quot;en_US.UTF-8&amp;amp;amp;amp;amp;quot;' &amp;amp;amp;amp;amp;gt; /etc/locale.conf
echo &amp;amp;amp;amp;amp;quot;KEYMAP=de&amp;amp;amp;amp;amp;quot; &amp;amp;amp;amp;amp;gt; /etc/vconsole.conf
mkinitcpio -p linux
sed -i '/GRUB_TIMEOUT/s/5/0/' /etc/default/grub
grub-mkconfig -o /boot/grub/grub.cfg
grub-install /dev/sda
passwd
useradd -m onny -s /usr/bin/fish
passwd onny
usermod -a -G sudo onny
sudo -u onny mkdir /home/onny/.ssh
sudo -u onny vim /home/onny/.ssh/authorized_keys
chown -R onny:onny /home/onny
updatedb
pkgfile --update
echo &amp;amp;amp;amp;amp;quot;UserParameter=archlinuxupdates,if [ -d /tmp/pacmandb ]; then fakeroot pacman -Syup --dbpath /tmp/pacmandb | grep &amp;amp;amp;amp;amp;quot;pkg.tar.xz&amp;amp;amp;amp;amp;quot; -c; else mkdir /tmp/pacmandb &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; ln -s /var/lib/pacman/local /tmp/pacmandb &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; fakeroot pacman -Syup --dbpath /tmp/pacmandb | grep &amp;amp;amp;amp;amp;quot;pkg.tar.xz&amp;amp;amp;amp;amp;quot; -c; fi&amp;amp;amp;amp;amp;quot; &amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;gt; /etc/zabbix/zabbix_agentd.conf
sed -i 's/^Server=.*$/Server=http-new.pi/g' /etc/zabbix/zabbix_agentd.conf
systemctl enable --now sshd systemd-networkd nftables fail2ban systemd-resolved
timedatectl set-ntp true
exit
reboot
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
=== nftables ===
&amp;amp;amp;amp;amp;lt;file - /etc/nftables.conf&amp;amp;amp;amp;amp;gt;
table inet filter {
        set tcp_accepted {
                type inet_service
                flags interval
                elements = { 22 }
        }

set udp_accepted {
                type inet_service
                flags interval
                elements = { 60000-61000 }
        }

chain base_checks {
                ct state { established, related } accept
                ct state invalid drop
        }

chain input {
                type filter hook input priority filter; policy drop;
                jump base_checks
                iifname &amp;amp;amp;amp;amp;quot;lo&amp;amp;amp;amp;amp;quot; accept
                ip protocol icmp icmp type { echo-reply, destination-unreachable, echo-request, time-exceeded, parameter-problem } accept
                ip6 nexthdr ipv6-icmp icmpv6 type { destination-unreachable, packet-too-big, time-exceeded, parameter-problem, echo-request, echo-reply, mld-listener-query, nd-router-solicit, nd-router-advert, nd-neighbor-solicit, nd-neighbor-advert } accept
                tcp dport @tcp_accepted accept
                udp dport @udp_accepted accept
                reject
        }

chain forward {
                type filter hook forward priority filter; policy drop;
                jump base_checks
        }

chain output {
                type filter hook output priority filter; policy accept;
        }
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
=== systemd-networkd ===
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/network/ens3.network&amp;amp;amp;amp;amp;gt;
[Match]
Name=ens3

[Network]
Address=2a01:4f8:191:327::10/64
Address=10.25.0.100/24
Gateway=10.25.0.1
Gateway=2a01:4f8:191:327::2
DNS=10.25.0.1
DNSSEC=false

LinkLocalAddressing = no
IPv6AcceptRA = no
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
=== pacman ===
project-insanity build server repo
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.conf&amp;amp;amp;amp;amp;gt;
[...]

[projectinsanity]
SigLevel = PackageOptional
Server = https://onny.project-insanity.org/archlinux
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
archlinux auto update
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/autoupdate.service&amp;amp;amp;amp;amp;gt;
[Unit]
 Description=Automatic Update
 After=network-online.target

[Service]
 Type=simple
 ExecStart=/usr/bin/pacman -Syuq --noconfirm --needed --noprogressbar 
 TimeoutStopSec=180
 KillMode=process
 KillSignal=SIGINT

[Install]
 WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/autoupdate.timer&amp;amp;amp;amp;amp;gt;
[Unit]
 Description=Automatic Update when booted up after 5 minutes then check the system for updates every 60 minutes

[Timer]
 OnBootSec=5min
 OnUnitActiveSec=60min
 Unit=autoupdate.service

[Install]
 WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable --now autoupdate.timer
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
=== systemd-journald ===
systemd logging upload
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/journal-upload.conf&amp;amp;amp;amp;amp;gt;
[Upload]
URL=http://10.25.0.1:19532
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/systemd-journal-upload.service&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Journal Remote Upload Service
Documentation=man:systemd-journal-upload(8)
After=network.target

[Service]
ExecStart=/lib/systemd/systemd-journal-upload --save-state
User=systemd-journal-upload
SupplementaryGroups=systemd-journal
PrivateTmp=yes
PrivateDevices=yes
WatchdogSec=3min

# Add reset/restart options
TimeoutSec=120
Restart=on-failure
RestartSec=2

# Add accounting options
CPUAccounting=true
BlockIOAccounting=true
MemoryAccounting=false
TasksAccounting=true

# If there are many splits up journal files we need a lot of file descriptors to access them all and combine
LimitNOFILE=16384

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
useradd systemd-journal-upload
mkdir /var/lib/systemd/journal-upload
chown -R systemd-journal-upload:systemd-journal-upload /var/lib/systemd/journal-upload
systemctl enable --now systemd-journal-upload
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;

==== Maintainance ====
Update configs
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo pacdiff
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
====== mail.pi ======
on mail.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S maddy
systemctl enable --now maddy
nft add rule inet filter input position 17 tcp dport smtps accept
nft add rule inet filter input position 17 tcp dport smtp accept
nft add rule inet filter input position 17 tcp dport imaps accept
nft list ruleset &amp;amp;amp;amp;amp;gt; /etc/nftables.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;on
&amp;amp;amp;amp;amp;lt;file - /etc/maddy/maddy.conf&amp;amp;amp;amp;amp;gt;
...
$(hostname) = turbotux.de
...
$(primary_domain) = turbotux.de
...
tls /etc/maddy/certs/$(hostname)/fullchain.pem /etc/maddy/certs/$(hostname)/privkey.pem
...
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
maddyctl users create postmaster
maddyctl users create onny@turbotux.de
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
turbotux.de dns record. get dkim key in ''/var/lib/maddy/dkim-keys/turbotux.de-default.dns''
&amp;amp;amp;amp;amp;lt;code&amp;amp;amp;amp;amp;gt;
turbotux.de.    A     144.76.16.40
turbotux.de.    AAAA  2a01:4f8:191:327::10
turbotux.de.    MX    10 turbotux.de
turbotux.de.    TXT   &amp;amp;amp;amp;amp;quot;v=spf1 mx -all&amp;amp;amp;amp;amp;quot;
_dmarc.turbotux.de.    TXT    &amp;amp;amp;amp;amp;quot;v=DMARC1; p=none; ruf=postmaster@turbotux.de&amp;amp;amp;amp;amp;quot;
default._domainkey.turbotux.de    TXT   &amp;amp;amp;amp;amp;quot;v=DKIM1; k=ed25519; p=nAcUUozPlhc4VPhp7hZl+owES7j7OlEv0laaDEDBAqg=&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
forwarding/nat on host.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
nft add rule inet filter input position 19 tcp dport smtps accept
nft add rule inet filter input position 19 tcp dport smtp accept
nft add rule inet filter input position 19 tcp dport imaps accept
nft add rule ip nat prerouting position 4 iifname &amp;amp;amp;amp;amp;quot;enp3s0&amp;amp;amp;amp;amp;quot; tcp dport imaps dnat to 10.25.0.102
nft add rule ip nat prerouting position 4 iifname &amp;amp;amp;amp;amp;quot;enp3s0&amp;amp;amp;amp;amp;quot; tcp dport smtp dnat to 10.25.0.102
nft add rule ip nat prerouting position 4 iifname &amp;amp;amp;amp;amp;quot;enp3s0&amp;amp;amp;amp;amp;quot; tcp dport smtps dnat to 10.25.0.102
nft list ruleset &amp;amp;amp;amp;amp;gt; /etc/nftables.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
tls. on mail.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
chmod +x /var/lib/private
sudo -u maddy ssh-keygen # all default values
cat /var/lib/maddy/.ssh/id_rsa.pub
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
on http.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
useradd -m maddy
mkdir /home/maddy/.ssh
vim /home/maddy/.ssh/authorized_keys
setfacl -R -d -m u:maddy:rx /var/lib/caddy/acme/acme-v02.api.letsencrypt.org/sites/t
urbotux.de/turbotux.de.crt /var/lib/caddy/acme/acme-v02.api.letsencrypt.org/sites/turbotux.de/turbotux
.de.key # this does not work so well yet :(
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
====== mysql.pi ======
===== mariadb =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S mariadb
mysql_install_db --user=mysql --basedir=/usr --datadir=/var/lib/mysql
mysqladmin -u root password 'new-password'
mysql_secure_installation
systemctl enable --now mariadb
nft add rule inet filter input position 17 ip saddr 10.25.0.0/24 tcp dport mysql accept
nft add rule inet filter input position 17 ip6 saddr 2a01:4f8:191:327::0/64 tcp dport mysql accept
nft list ruleset &amp;amp;amp;amp;amp;gt; /etc/nftables.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.d/hooks/40-mariadb.hook&amp;amp;amp;amp;amp;gt;
# Restart mariadb service

[Trigger]
Operation = Install
Operation = Upgrade
Type = Package
Target = mariadb

[Action]
Description = Restarting mariadb service
When = PostTransaction
Exec = /usr/bin/sh -c &amp;amp;amp;amp;amp;quot;/usr/bin/mysql_upgrade -u root -p'****' &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; /usr/bin/systemctl restart mariadb&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
chmod 600 /etc/pacman.d/hooks/40-mariadb.hook
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
temporary workaround to get nextcloud to work, see: https://github.com/nextcloud/server/issues/27085
&amp;amp;amp;amp;amp;lt;file - /etc/my.cnf.d/server.cnf&amp;amp;amp;amp;amp;gt;
[...]
[server]

innodb_read_only_compressed=0
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
===== postgresql =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S postgresql postgresql-old-upgrade
sudo su - postgres -c &amp;amp;amp;amp;amp;quot;initdb -D /var/lib/postgres/data&amp;amp;amp;amp;amp;quot;
systemctl enable --now postgresql
nft add rule inet filter input position 17 ip saddr 10.25.0.0/24 tcp dport postgresql accept
nft add rule inet filter input position 17 ip6 saddr 2a01:4f8:191:327::0/64 tcp dport postgresql accept
nft list ruleset &amp;amp;amp;amp;amp;gt; /etc/nftables.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /var/lib/postgres/data/postgresql.conf&amp;amp;amp;amp;amp;gt;
[...]
listen_addresses = '*'
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /var/lib/postgres/data/pg_hba.conf&amp;amp;amp;amp;amp;gt;
[...]
host    all             all             10.25.0.0/24            md5
host    all             all             2a01:4f8:191:327::/64           md5
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.d/hooks/postgresql.hook&amp;amp;amp;amp;amp;gt;
# Restart postgresql service

[Trigger]
Operation = Install
Operation = Upgrade
Type = Package
Target = postgresql

[Action]
Description = Restarting postgresql service
When = PostTransaction
Exec = /usr/bin/systemctl restart postgresql
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
====== http.pi ======
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S caddy dokuwiki gitlab php-fpm php-apcu phpmyadmin wordpress nginx
systemctl enable --now caddy php-fpm
nft add rule inet filter input position 17 tcp dport &amp;amp;amp;amp;amp;quot;{http, https}&amp;amp;amp;amp;amp;quot; accept
nft list ruleset &amp;amp;amp;amp;amp;gt; /etc/nftables.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.d/hooks/php.hook&amp;amp;amp;amp;amp;gt;
# Restart php service

[Trigger]
Operation = Install
Operation = Upgrade
Type = Package
Target = php
Target = php-fpm

[Action]
Description = Restarting php service
When = PostTransaction
Exec = /usr/bin/systemctl restart php-fpm
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
custom caddy installation
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacaur -d caddy
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - ~/.cache/pacaur/caddy/PKGBUILD&amp;amp;amp;amp;amp;gt;
[...]
#    'http.hugo'
    'http.ipfilter'
#    'http.jekyll'
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
cd ~/.cache/pacaur/caddy
makepkg -i --skipinteg
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/caddy.service.d/override.conf&amp;amp;amp;amp;amp;gt;
[Service]
ProtectHome=false
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
===== caddy =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S caddy
gpasswd -a caddy http
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/Caddyfile&amp;amp;amp;amp;amp;gt;
import /etc/caddy/conf.d/*
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/ausstellung-virtuell.de.conf&amp;amp;amp;amp;amp;gt;
www.ausstellung-virtuell.de ausstellung-virtuell.de {

log {
                output file     /var/log/caddy/ausstellung-virtuell.de.log
                format single_field common_log
        }

reverse_proxy http://http-pub.pi

}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/blog.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
blog.project-insanity.org {

root    * /usr/share/webapps/wordpress
        file_server
        log {
                output file     /var/log/caddy/blog.project-insanity.org.log
                format single_field common_log
        }

php_fastcgi unix//var/run/php-fpm/php-fpm.sock

@uploads {
          path_regexp path /uploads\/(.*)\.php
        }
        rewrite @uploads /

@wp-admin {
          path  not ^\/wp-admin/*
        }
        rewrite @wp-admin {path}/index.php?{query}

}

&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/git.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
git.project-insanity.org {

log {
                output file     /var/log/caddy/git.project-insanity.org.log
                format single_field common_log
        }

reverse_proxy unix//run/gitlab/gitlab-workhorse.socket

}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/jhartung.sinewell.de.conf&amp;amp;amp;amp;amp;gt;
jhartung.sinewell.de {

log {
                output file     /var/log/caddy/jhartung.sinewell.de.log
                format single_field common_log
        }

reverse_proxy https://wrsmtwhrearj2wyg.myfritz.net:46190

}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/nextcloud.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
nextcloud.project-insanity.org {

root    * /usr/share/webapps/nextcloud
        file_server
        log {
                output file     /var/log/caddy/nextcloud.project-insanity.org.log
                format single_field common_log
        }

php_fastcgi unix//var/run/php-fpm/php-fpm.sock {
                env front_controller_active true
        }

header {
                # enable HSTS
                Strict-Transport-Security max-age=31536000;
        }

redir /.well-known/carddav /remote.php/dav 301
        redir /.well-known/caldav /remote.php/dav 301

# .htaccess / data / config / ... shouldn't be accessible from outside
        @forbidden {
                path    /.htaccess
                path    /data/*
                path    /config/*
                path    /db_structure
                path    /.xml
                path    /README
                path    /3rdparty/*
                path    /lib/*
                path    /templates/*
                path    /occ
                path    /console.php
        }

respond @forbidden 404

}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/onny.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
onny.project-insanity.org {

log {
                output file     /var/log/caddy/onny.project-insanity.org.log
                format single_field common_log
        }

reverse_proxy http://http-pub.pi

}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/wiki.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
wiki.project-insanity.org {

root    * /usr/share/webapps/dokuwiki
        file_server
        log {
                output file     /var/log/caddy/wiki.project-insanity.org.log
                format single_field common_log
        }

encode zstd gzip
        php_fastcgi unix//var/run/php-fpm/php-fpm.sock

@restrict_files {
      path /data/* /conf/* /bin/* /inc/* /vendor/* /install.php
    }
    respond @restrict_files 404

@allow_media {
          path_regexp path ^/_media/(.*)$
        }
        rewrite @allow_media /lib/exe/fetch.php?media=/{http.regexp.path.1}

@allow_detail   {
      path /_detail*
    }
    rewrite @allow_detail /lib/exe/detail.php?media={path}

@allow_export   {
      path /_export*
      path_regexp export /([^/]+)/(.*)
    }
    rewrite @allow_export /doku.php?do=export_{http.regexp.export.1}&amp;amp;amp;amp;amp;amp;id={http.regexp.export.2}

try_files {path} {path}/ /doku.php?id={path}&amp;amp;amp;amp;amp;amp;{query}
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/http.pi.conf&amp;amp;amp;amp;amp;gt;
http://http.pi {

root    * /var/www
        file_server * browse
        log {
                output file     /var/log/caddy/http.pi.log
                format single_field common_log
        }

php_fastcgi unix//var/run/php-fpm/http.pi_php-fpm.sock
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/saai.digital&amp;amp;amp;amp;amp;gt;
beta.saai.digital {

log {
                output file     /var/log/caddy/saai.digital.log
                format single_field common_log
        }

reverse_proxy http://playground.pi:8080

}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/office.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
office.project-insanity.org {

log {
                output file     /var/log/caddy/office.project-insanity.org.log
                format single_field common_log
        }

# Routing Onlyoffice Spellchecker
    route /spellchecker/* {
        uri strip_prefix /spellchecker
        reverse_proxy localhost:8081
    }

# Routing Onlyoffice Documentserver etc.
        @onlyoffice {
          path_regexp path ^/(cache|downloadas|sdkjs|plugins.json|fonts|web-apps|upload|doc|healthcheck|coauthoring|ConvertService.ashx)
        }
        rewrite @onlyoffice /proxy/{uri}
    route /proxy/* {
        uri strip_prefix /proxy/
        reverse_proxy localhost:8000
    }

# Route to Officepad
    reverse_proxy / http://localhost:8082

}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
need to convert
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/turbotux.de.conf&amp;amp;amp;amp;amp;gt;
www.turbotux.de turbotux.de {
    log /var/log/caddy/turbotux.de_access.log
    errors /var/log/caddy/turbotux.de_errors.log
    gzip
    tls onny@project-insanity.org
    proxy / http://picloud.sexypump.de:8096 {
        websocket
    }
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
===== php-fpm =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
cp /etc/php/php-fpm.d/www.conf /etc/php/php-fpm.d/http.pi.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/php/php-fpm.d/www.conf&amp;amp;amp;amp;amp;gt;
[...]
pm.max_children = 16
[...]
pm.start_servers = 9
[...]
pm.max_spare_servers = 10
[...]
;env[HOSTNAME] = $HOSTNAME
env[PATH] = /usr/local/bin:/usr/bin:/bin
env[TMP] = /tmp
env[TMPDIR] = /tmp
env[TEMP] = /tmp
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/php/php-fpm.d/http.pi.conf&amp;amp;amp;amp;amp;gt;
[...]
[http.pi]
[...]
listen = /run/php-fpm/http.pi_php-fpm.sock
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/php-fpm.service.d/overwrite-rw-path.conf&amp;amp;amp;amp;amp;gt;[Service]
ReadWritePaths = /usr/share/webapps/nextcloud/data
ReadWritePaths = /usr/share/webapps/nextcloud/apps
ReadWritePaths = /etc/webapps/nextcloud/config/
ReadWritePaths = /usr/share/webapps/wordpress/wp-content
ReadWritePaths = /usr/share/webapps/invoiceplane/vendor/mpdf/mpdf/tmp
ReadWritePaths = /usr/share/webapps/invoiceplane/uploads/archive
ReadWritePaths = /usr/share/webapps/invoiceplane/uploads/customer_files
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;

===== wordpress =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S wordpress wp-cli wordpress-plugin-antispam-bee wordpress-plugin-code-syntax-block wordpress-plugin-jetpack-lite wordpress-plugin-lightbox-photoswipe wordpress-plugin-wp-gdpr-compliance wordpress-plugin-wp-statistics wordpress-plugin-co-authors-plus wordpress-theme-geist wordpress-plugin-wp-user-avatar wordpress-plugin-opengraph wordpress-plugin-simple-login-captcha wordpress-plugin-disable-xml-rpc wordpress-plugin-async-javascript wordpress-plugin-breeze wordpress-plugin-webp-converter-for-media
chown -R http:http /usr/share/webapps/wordpress/wp-admin /usr/share/webapps/wordpress/wp-includes
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/php/conf.d/wordpress.ini&amp;amp;amp;amp;amp;gt;
extension=mysqli
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file php /home/pi_wordpress/wordpress/wp-config.php&amp;amp;amp;amp;amp;gt;
define('DB_NAME', '****');
define('DB_USER', '****');
define('DB_PASSWORD', '****');
define('DB_HOST', '****');
[...]
define('AUTH_KEY',         '****');
define('SECURE_AUTH_KEY',  '****');
define('LOGGED_IN_KEY',    '****');
define('NONCE_KEY',        '****');
define('AUTH_SALT',        '****');
define('SECURE_AUTH_SALT', '****');
define('LOGGED_IN_SALT',   '****');
define('NONCE_SALT',       '****');
[...]
define('FORCE_SSL_ADMIN', true);
define('FS_METHOD', 'direct');
define( 'WP_SITEURL','https://blog.project-insanity.org');
define( 'WP_HOME','https://blog.project-insanity.org');
$_SERVER['HTTPS']='on';
define( 'WP_AUTO_UPDATE_CORE', true );
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.d/hooks/wordpress.hook&amp;amp;amp;amp;amp;gt;
# Update Wordpress when core or plugins get updated

[Trigger]
Operation = Install
Operation = Upgrade
Type = Package
Target = wordpress
Target = wordpress-plugin-*

[Action]
Description = Updating Wordpress installation
When = PostTransaction
Exec = /usr/bin/sh -c &amp;amp;amp;amp;amp;quot;/usr/bin/sudo -u http /usr/bin/bash -c 'wp core update-db --path=/usr/share/webapps/wordpress; wp plugin activate --path=/usr/share/webapps/wordpress antispam-bee code-syntax-block jetpack jetpack-lite lightbox-photoswipe wp-gdpr-compliance wp-statistics co-authors-plus wp-user-avatar opengraph simple-login-captcha disable-xml-rpc async-javascript breeze webp-converter-for-media'&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo -u http wp plugin activate --path=/usr/share/webapps/wordpress antispam-bee code-syntax-block jetpack jetpack-lite lightbox-photoswipe wp-gdpr-compliance wp-statistics co-authors-plus wp-user-avatar opengraph simple-login-captcha disable-xml-rpc async-javascript breeze webp-converter-for-media
sudo -u http wp theme activate --path=/usr/share/webapps/wordpress geist
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Additional CSS for Geist theme
&amp;amp;amp;amp;amp;lt;code css&amp;amp;amp;amp;amp;gt;
@media (max-width: 1400px) {
	.single-post .post-content &amp;amp;amp;amp;amp;gt; p:first-child {
		font-size: 1em;
	}

.single-post .post-content &amp;amp;amp;amp;amp;gt; p, ul {
		font-size: 0.8em;
	}
	
	.single-post .post-content &amp;amp;amp;amp;amp;gt; h3 {
		padding-bottom: 0.8em;
	}
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Misc settings
  * WP Statistics
    * Settings -&amp;amp;amp;amp;amp;gt; privacy: &amp;amp;amp;amp;amp;quot;Hash IP Addresses&amp;amp;amp;amp;amp;quot; (GDPR)
  * Lightbox with PhotoSwipe
    * Enable &amp;amp;amp;amp;amp;quot;Show caption if available&amp;amp;amp;amp;amp;quot;
    * Enable &amp;amp;amp;amp;amp;quot;Get image captions from the database&amp;amp;amp;amp;amp;quot;
    * Spacing between pictures: 12%
  * Settings -&amp;amp;amp;amp;amp;gt; Permalinks -&amp;amp;amp;amp;amp;gt; Custom structure: ''/%year%/%monthnum%/%day%/%postname%/''
  * Settings -&amp;amp;amp;amp;amp;gt; General -&amp;amp;amp;amp;amp;gt; 8 posts per page
  * Settings -&amp;amp;amp;amp;amp;gt; Discussion -&amp;amp;amp;amp;amp;gt; Show avatar
    * Default Avatar -&amp;amp;amp;amp;amp;gt; Mytery Man
  * Users -&amp;amp;amp;amp;amp;gt; Your Profile -&amp;amp;amp;amp;amp;gt; Avatar: Choose picture
  * Dark mode is not enabled by default. To enable this feature go to Appearance &amp;amp;amp;amp;amp;gt; Customize &amp;amp;amp;amp;amp;gt; Dark Mode.
Additional CSS for Ghost theme:
&amp;amp;amp;amp;amp;lt;code css&amp;amp;amp;amp;amp;gt;
@media (max-width: 1400px) {
	.single-post .post-content &amp;amp;amp;amp;amp;gt; p:first-child {
		font-size: 1em;
	}

.single-post .post-content &amp;amp;amp;amp;amp;gt; p, ul {
		font-size: 0.8em;
	}
	
	.single-post .post-content &amp;amp;amp;amp;amp;gt; h3 {
		padding-bottom: 0.8em;
	}
}

.post-full-content h2 {
	margin-bottom: 0.8em;
}
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== co-authors-plus plugin ====
template-Anpassung \\
[[https://www.wpbeginner.com/plugins/allow-multiple-authors-to-be-associated-with-a-post-in-wordpress/|How to Add Multiple Authors (Co-Authors) for Posts in WordPress]]
&amp;amp;amp;amp;amp;lt;file php /home/pi_wordpress/wordpress/functions-content.php&amp;amp;amp;amp;amp;gt; 
if ( function_exists( 'coauthors_posts_links' ) ) {
    coauthors_posts_links();
} else {
    the_author_posts_link();
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
===== invoiceninja =====
on mysql.pi
&amp;amp;amp;amp;amp;lt;code sql&amp;amp;amp;amp;amp;gt;
CREATE SCHEMA `ninja` DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci;
CREATE USER 'ninja'@'http.pi' IDENTIFIED BY '****';
GRANT ALL PRIVILEGES ON `ninja`.* TO 'ninja'@'http.pi';
FLUSH PRIVILEGES;
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
on http.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S invoiceninja
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/php/conf.d/composer.ini&amp;amp;amp;amp;amp;gt;
extension=gmp
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
cd /usr/share/webapps/invoiceninja
sudo chown -R http:http storage public/logo bootstrap
sudo chown http:http .
sudo -u http composer install
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/http.pi.conf&amp;amp;amp;amp;amp;gt;
http://http.pi/invoiceninja {
        log /var/log/caddy/http.pi_access.log
        errors /var/log/caddy/http.pi_errors.log
        gzip

tls off
        root /usr/share/webapps/invoiceninja/public
        browse

rewrite {
                r .*
                ext /
                to /index.php?{query}
        }

fastcgi / /var/run/php-fpm/http.pi_php-fpm.sock php {
                index index.php index.htm index.html
        }
}
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
Settings
  * Localization
    * Currency: Euro
    * Timezone: Berlin
    * Date Format: 31.12.2019
    * Date/Time Format: 31.12.2019 12:00 am
    * 24 Hour Time: Enabled
    * First Day of the Week: Monday
    * First Month of the Year: January
===== invoiceplane =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S invoiceplane composer grunt-cli
cd /usr/share/webapps/invoiceplane
chown -R http:http .
sudo -u http composer install
sudo -u http npm install
sudo -u http grunt build
cp ipconfig.php.example ipconfig.php
wget &amp;amp;amp;amp;amp;quot;https://git.project-insanity.org/onny/invoiceplane-vtdirektmarketing/-/raw/master/vtdirektmarketing.php&amp;amp;amp;amp;amp;quot; -O /usr/share/webapps/invoiceplane/application/views/invoice_templates/pdf/vtdirektmarketing.php
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Visit installation wizard at http://http.pi/invoiceplane/index.php/setup
&amp;amp;amp;amp;amp;lt;file - /usr/share/webapps/invoiceplane/ipconfig.php&amp;amp;amp;amp;amp;gt;
[...]
SETUP_COMPLETED=true
DB_HOSTNAME=mysql.pi
DB_USERNAME=invoiceplane
DB_PASSWORD=****
DB_DATABASE=invoiceplane
DISABLE_SETUP=true
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/php-fpm.service.d/overwrite-rw-path.conf&amp;amp;amp;amp;amp;gt;
[Service]
[...]
ReadWritePaths = /usr/share/webapps/invoiceplane/vendor/mpdf/mpdf/tmp
ReadWritePaths = /usr/share/webapps/invoiceplane/uploads/archive
ReadWritePaths = /usr/share/webapps/invoiceplane/uploads/customer_files
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
Custom settings
  * Products -&amp;amp;amp;amp;amp;gt; Product units
    * Add: ''Stk.'', ''Std.''
  * System-Einstellungen -&amp;amp;amp;amp;amp;gt; Rechnungen
    * Standard PDF Vorlage: vtdirektmarketing
===== firefox account server =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacaur -S mozilla-firefox-account-server
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
===== podcasttune =====
not yet stable
===== dokuwiki =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S dokuwiki dokuwiki-plugin-dw2pdf dokuwiki-template-argon
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file php /etc/webapps/dokuwiki/local.php&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;?php
$conf['title'] = 'Project-Insanity';
$conf['userewrite']  = 1;
$conf['template']    = 'argon';
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /usr/lib/dokuwiki/plugins/dw2pdf/conf/default.php&amp;amp;amp;amp;amp;gt;
[...]
$conf['doublesided']      = 0;
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /usr/lib/dokuwiki/plugins/dw2pdf/tpl/default/style.css&amp;amp;amp;amp;amp;gt;
@page {
    margin-left: 100px;
}

[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
usage: ''https://wiki.project-insanity.org/onny?do=export_pdf''
  * Todo
    * DSGVO complience
===== gitlab =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S yarn sendmail gitlab
ln -s /usr/bin/vendor_perl/exiftool /usr/bin/exiftool # fix for https://gitlab.com/gitlab-org/gitlab-foss/-/issues/60853
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
disable backups
&amp;amp;amp;amp;amp;lt;file - /etc/webapps/gitlab/gitlab.yml&amp;amp;amp;amp;amp;gt;
[...]
  gitlab:
    ## Web server settings (note: host is the FQDN, do not include http://)
    host: git.project-insanity.org
    port: 443 # Set to 443 if using HTTPS, see installation.md#using-https for additional HTTPS configuration details
    https: true # Set to true if using HTTPS, see installation.md#using-https for additional HTTPS configuration details
[...]
  #backup:
  #  path: &amp;amp;amp;amp;amp;quot;/var/lib/gitlab/backups&amp;amp;amp;amp;amp;quot;   # Relative paths are relative to Rails.root (default: tmp/backups/)
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
configure database connection
&amp;amp;amp;amp;amp;lt;file - /etc/webapps/gitlab/database.yml&amp;amp;amp;amp;amp;gt;
production:
  adapter: postgresql
  encoding: unicode
  database: gitlabhq_production
  pool: 10
  username: gitlab
  password: &amp;amp;amp;amp;amp;quot;****&amp;amp;amp;amp;amp;quot;
  host: mysql.pi
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
on mysql.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo -u postgres psql -d template1 -c &amp;amp;amp;amp;amp;quot;CREATE USER gitlab CREATEDB;&amp;amp;amp;amp;amp;quot;
sudo -u postgres psql -d template1 -c &amp;amp;amp;amp;amp;quot;CREATE EXTENSION IF NOT EXISTS pg_trgm;&amp;amp;amp;amp;amp;quot;
sudo -u postgres psql -d template1 -c &amp;amp;amp;amp;amp;quot;CREATE DATABASE gitlabhq_production OWNER gitlab;&amp;amp;amp;amp;amp;quot;
sudo -u postgres psql -d template1 -c &amp;amp;amp;amp;amp;quot;ALTER USER gitlab WITH SUPERUSER;&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
on http.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
 cd /usr/share/webapps/gitlab
 sudo -u gitlab -H bundle exec rake assets:precompile RAILS_ENV=production
 sudo -u gitlab -H bundle exec rake gitlab:setup RAILS_ENV=production
 systemctl enable --now gitlab-workhorse redis gitlab-puma gitlab-sidekiq gitlab-gitaly
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Enable smtp, mail delivery
&amp;amp;amp;amp;amp;lt;file ruby /etc/webapps/gitlab/smtp_settings.rb&amp;amp;amp;amp;amp;gt;
# To enable smtp email delivery for your GitLab instance do the following:
# 1. Rename this file to smtp_settings.rb
# 2. Edit settings inside this file
# 3. Restart GitLab instance
#
# For full list of options and their values see http://api.rubyonrails.org/classes/ActionMailer/Base.html
#
# If you change this file in a Merge Request, please also create a Merge Request on https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests

if Rails.env.production?
  Rails.application.config.action_mailer.delivery_method = :smtp

ActionMailer::Base.delivery_method = :smtp
  ActionMailer::Base.smtp_settings = {
    address: &amp;amp;amp;amp;amp;quot;mail.pi&amp;amp;amp;amp;amp;quot;,
    port: 25,
    user_name: &amp;amp;amp;amp;amp;quot;git@project-insanity.org&amp;amp;amp;amp;amp;quot;,
    password: &amp;amp;amp;amp;amp;quot;****&amp;amp;amp;amp;amp;quot;,
    domain: &amp;amp;amp;amp;amp;quot;project-insanity.org&amp;amp;amp;amp;amp;quot;,
    authentication: :login,
    enable_starttls_auto: false,
    openssl_verify_mode: 'none'
  }
end
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
further general mail settings
&amp;amp;amp;amp;amp;lt;file - /etc/webapps/gitlab/gitlab.yml&amp;amp;amp;amp;amp;gt;
   ## Email settings
    # Uncomment and set to false if you need to disable email sending from GitLab (default: true)
    email_enabled: true
    # Email address used in the &amp;amp;amp;amp;amp;quot;From&amp;amp;amp;amp;amp;quot; field in mails sent by GitLab
    email_from: noreply@project-insanity.org
    email_display_name: GitLab
    email_reply_to: noreply@project-insanity.org
    email_subject_suffix: ''
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
Auto migrate on pacman update
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.d/hooks/gitlab.hook&amp;amp;amp;amp;amp;gt;
# Update Gitlab when core or other Gitlab daemons are touched

[Trigger]
Operation = Install
Operation = Upgrade
Type = Package
Target = gitlab
Target = gitlab-*

[Action]
Description = Updating Gitlab installation
When = PostTransaction
Exec = /usr/bin/sh -c &amp;amp;amp;amp;amp;quot;/usr/bin/systemctl restart gitlab-workhorse gitlab-puma gitlab-sidekiq gitlab-gitaly &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; cd /usr/share/webapps/gitlab &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; /usr/bin/sudo -u gitlab $(cat /usr/share/webapps/gitlab/environment | xargs) /usr/bin/bash -c 'cd /usr/share/webapps/gitlab; bundle-2.7 exec rake db:migrate'&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/webapps/gitlab/secrets.yml&amp;amp;amp;amp;amp;gt;
****
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
hexdump -v -n 64 -e '1/1 &amp;amp;amp;amp;amp;quot;%02x&amp;amp;amp;amp;amp;quot;' /dev/urandom &amp;amp;amp;amp;amp;gt; /etc/webapps/gitlab/secret
hexdump -v -n 64 -e '1/1 &amp;amp;amp;amp;amp;quot;%02x&amp;amp;amp;amp;amp;quot;' /dev/urandom &amp;amp;amp;amp;amp;gt; /etc/webapps/gitlab-shell/secret
chown root:gitlab /etc/webapps/gitlab/secret /etc/webapps/gitlab-shell/secret
chmod 640 /etc/webapps/gitlab/secret /etc/webapps/gitlab-shell/secret
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
misc settings:
  * enable recaptcha for registration https://docs.gitlab.com/ee/integration/recaptcha.html
  * disable ssh git protocol: Admin -&amp;amp;amp;amp;amp;gt; Settings -&amp;amp;amp;amp;amp;gt; Expand &amp;amp;amp;amp;amp;quot;Visibility and access controls&amp;amp;amp;amp;amp;quot; -&amp;amp;amp;amp;amp;gt; For &amp;amp;amp;amp;amp;quot;Enabled Git access protocols&amp;amp;amp;amp;amp;quot; select &amp;amp;amp;amp;amp;quot;Only HTTP(S)&amp;amp;amp;amp;amp;quot;
===== onlyoffice documentserver =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S npm nodejs rabbitmq redis onlyoffice-documentserver
ln -s /usr/share/libalpm/hooks/onlyoffice-documentserver.hook /etc/pacman.d/hooks/
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
on mysql.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo -i -u postgres psql -c &amp;amp;amp;amp;amp;quot;CREATE DATABASE onlyoffice;&amp;amp;amp;amp;amp;quot;
sudo -i -u postgres psql -c &amp;amp;amp;amp;amp;quot;CREATE USER onlyoffice WITH password 'onlyoffice';&amp;amp;amp;amp;amp;quot;
sudo -i -u postgres psql -c &amp;amp;amp;amp;amp;quot;GRANT ALL privileges ON DATABASE onlyoffice TO onlyoffice;&amp;amp;amp;amp;amp;quot;
psql -hmysql.pi -Uonlyoffice -d onlyoffice -f /usr/share/webapps/onlyoffice/documentserver/server/schema/postgresql/createdb.sql
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/office.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
office.project-insanity.org {
    log /var/log/caddy/office.project-insanity.org_access.log
    errors /var/log/caddy/office.project-insanity.org_errors.log

proxy /spellchecker http://localhost:8081 {
        transparent
        websocket
        without /spellchecker
    }

rewrite {
        r ^/(cache|downloadas|sdkjs|plugins.json|fonts|web-apps|upload|doc)/
        to /proxy/{uri}
    }

proxy /proxy/ http://localhost:8000 {
        websocket
        transparent
        without /proxy/
    }

proxy / http://localhost:8082 {
        transparent
    }
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/webapps/onlyoffice/documentserver/default.json&amp;amp;amp;amp;amp;gt;
[...]
                        &amp;amp;amp;amp;amp;quot;sql&amp;amp;amp;amp;amp;quot;: {
                                &amp;amp;amp;amp;amp;quot;type&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;postgres&amp;amp;amp;amp;amp;quot;,
                                &amp;amp;amp;amp;amp;quot;tableChanges&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;doc_changes&amp;amp;amp;amp;amp;quot;,
                                &amp;amp;amp;amp;amp;quot;tableResult&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;task_result&amp;amp;amp;amp;amp;quot;,
                                &amp;amp;amp;amp;amp;quot;dbHost&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;mysql.pi&amp;amp;amp;amp;amp;quot;,
                                &amp;amp;amp;amp;amp;quot;dbPort&amp;amp;amp;amp;amp;quot;: 5432,
                                &amp;amp;amp;amp;amp;quot;dbName&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;onlyoffice&amp;amp;amp;amp;amp;quot;,
                                &amp;amp;amp;amp;amp;quot;dbUser&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;onlyoffice&amp;amp;amp;amp;amp;quot;,
                                &amp;amp;amp;amp;amp;quot;dbPass&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;onlyoffice&amp;amp;amp;amp;amp;quot;,
                                &amp;amp;amp;amp;amp;quot;charset&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;utf8&amp;amp;amp;amp;amp;quot;,
                                &amp;amp;amp;amp;amp;quot;connectionlimit&amp;amp;amp;amp;amp;quot;: 10,
                                &amp;amp;amp;amp;amp;quot;max_allowed_packet&amp;amp;amp;amp;amp;quot;: 1048575
                        },
[...]
       &amp;amp;amp;amp;amp;quot;SpellChecker&amp;amp;amp;amp;amp;quot;: {
                &amp;amp;amp;amp;amp;quot;server&amp;amp;amp;amp;amp;quot;: {
                        &amp;amp;amp;amp;amp;quot;port&amp;amp;amp;amp;amp;quot;: 8081,
                        &amp;amp;amp;amp;amp;quot;mode&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;development&amp;amp;amp;amp;amp;quot;
                }
        }
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/hosts&amp;amp;amp;amp;amp;gt;
10.25.0.100 nextcloud.project-insanity.org
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable --now rabbitmq redis onlyoffice-docservice onlyoffice-fileconverter onlyoffice-spellchecker
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== officepad ====
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/officepad.service&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Documentserver integration example

[Service]
User=http
WorkingDirectory=/usr/share/webapps/officepad
ExecStart=/usr/bin/node bin/www

[Install]
WantedBy=basic.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo git clone git clone https://git.project-insanity.org/onny/officepad.git /usr/share/webapps/officepad
sudo chown -R http:http /usr/share/webapps/officepad
systemd daemon-reload
systemctl enable --now officepad
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /usr/share/webapps/officepad/config/default.json&amp;amp;amp;amp;amp;gt;
[...]
siteUrl&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;https://bwsas-prod-oo-02.lsdf.kit.edu/&amp;amp;amp;amp;amp;quot;
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
 ===== nextcloud =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S php-imagick php-intl nextcloud nextcloud-app-twofactor-gateway nextcloud-app-audioplayer nextcloud-app-polls nextcloud-app-extract nextcloud-app-suspicious-login nextcloud nextcloud-app-mail nextcloud-app-news nextcloud-app-calendar nextcloud-app-contacts nextcloud-app-keeweb nextcloud-app-deck nextcloud-app-onlyoffice nextcloud-app-bookmarks nextcloud-app-notes nextcloud-app-talk nextcloud-integration-github nextcloud-integration-twitter nextcloud-integration-reddit nextcloud-integration-discourse nextcloud-app-radio nextcloud-app-podcast
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/php/php-fpm.d/www.conf&amp;amp;amp;amp;amp;gt;
env[PATH] = /usr/local/bin:/usr/bin:/bin
env[TMP] = /tmp
env[TMPDIR] = /tmp
env[TEMP] = /tmp
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
php performance optimizations
&amp;amp;amp;amp;amp;lt;file - /etc/php/conf.d/nextcloud.ini&amp;amp;amp;amp;amp;gt;
memory_limit = 512M

extension=gd
extension=pdo_mysql
extension=apcu
extension=intl
extension=iconv
extension=imagick
extension=bcmath

# Nextcloud recommended performance settings
zend_extension=opcache.so
opcache.enable=1
opcache.enable_cli=1
opcache.interned_strings_buffer=8
opcache.max_accelerated_files=10000
opcache.memory_consumption=128
opcache.save_comments=1
opcache.revalidate_freq=1

apc.enable_cli=1
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /usr/share/webapps/nextcloud/conf/config.php&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;?php
$CONFIG = array (
  'instanceid' =&amp;amp;amp;amp;amp;gt; '****',
  'passwordsalt' =&amp;amp;amp;amp;amp;gt; '****',
  'datadirectory' =&amp;amp;amp;amp;amp;gt; '/usr/share/webapps/nextcloud/data',
  'dbtype' =&amp;amp;amp;amp;amp;gt; 'mysql',
  'version' =&amp;amp;amp;amp;amp;gt; '19.0.0.12',
  'dbname' =&amp;amp;amp;amp;amp;gt; 'nextcloud',
  'dbhost' =&amp;amp;amp;amp;amp;gt; 'mysql.pi',
  'dbtableprefix' =&amp;amp;amp;amp;amp;gt; 'oc_',
  'mysql.utf8mb4' =&amp;amp;amp;amp;amp;gt; true,
  'dbuser' =&amp;amp;amp;amp;amp;gt; 'nextcloud',
  'dbpassword' =&amp;amp;amp;amp;amp;gt; '****',
  'installed' =&amp;amp;amp;amp;amp;gt; true,
  'theme' =&amp;amp;amp;amp;amp;gt; '',
  'maintenance' =&amp;amp;amp;amp;amp;gt; false,
  'loglevel' =&amp;amp;amp;amp;amp;gt; 0,
  'cron_log' =&amp;amp;amp;amp;amp;gt; true,
  'maxZipInputSize' =&amp;amp;amp;amp;amp;gt; 5145728000,
  'allowZipDownload' =&amp;amp;amp;amp;amp;gt; true,
  'memcache.local' =&amp;amp;amp;amp;amp;gt; '\\OC\\Memcache\\APCu',
  'allow_local_remote_servers' =&amp;amp;amp;amp;amp;gt; true,
  'trusted_domains' =&amp;amp;amp;amp;amp;gt; 
  array (
    0 =&amp;amp;amp;amp;amp;gt; 'nextcloud.project-insanity.org',
    1 =&amp;amp;amp;amp;amp;gt; 'http.pi',
    2 =&amp;amp;amp;amp;amp;gt; 'office.project-insanity.org',
  ),
  'secret' =&amp;amp;amp;amp;amp;gt; '****',
  'mail_domain' =&amp;amp;amp;amp;amp;gt; 'project-insanity.org',
  'mail_smtpmode' =&amp;amp;amp;amp;amp;gt; 'php',
  'mail_from_address' =&amp;amp;amp;amp;amp;gt; 'nextcloud',
  'trashbin_retention_obligation' =&amp;amp;amp;amp;amp;gt; 'auto',
  'updatechecker' =&amp;amp;amp;amp;amp;gt; false,
  'has_internet_connection' =&amp;amp;amp;amp;amp;gt; false,
  'app.mail.verify-tls-peer' =&amp;amp;amp;amp;amp;gt; false,
  'app_install_overwrite' =&amp;amp;amp;amp;amp;gt; 
  array (
    0 =&amp;amp;amp;amp;amp;gt; 'apporder',
    1 =&amp;amp;amp;amp;amp;gt; 'keeweb',
    2 =&amp;amp;amp;amp;amp;gt; 'tasks',
    3 =&amp;amp;amp;amp;amp;gt; 'weather',
    4 =&amp;amp;amp;amp;amp;gt; 'audioplayer',
    5 =&amp;amp;amp;amp;amp;gt; 'files_ebookreader',
    6 =&amp;amp;amp;amp;amp;gt; 'extract',
    7 =&amp;amp;amp;amp;amp;gt; 'polls',
    8 =&amp;amp;amp;amp;amp;gt; 'onlyoffice',
    9 =&amp;amp;amp;amp;amp;gt; 'drawio',
  ),
);
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
Due to [[https://bugs.archlinux.org/task/64689?project=5&amp;amp;amp;amp;amp;amp;string=nextcloud|packaging bug]] and hardened php-fpm.service file, an unit file overwrite is required:
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/php-fpm.service.d/overwrite-rw-path.conf&amp;amp;amp;amp;amp;gt;
[Service]
[...]
ReadWritePaths = /usr/share/webapps/nextcloud/data
ReadWritePaths = /usr/share/webapps/nextcloud/apps
ReadWritePaths = /etc/webapps/nextcloud/config/
ReadWritePaths = /usr/share/webapps/wordpress/wp-content
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
Auto upgrade on pacman update
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
ln -sv /usr/share/doc/nextcloud/nextcloud.hook /etc/pacman.d/hooks/
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.d/hooks/nextcloud-enable-apps.hook&amp;amp;amp;amp;amp;gt;
# Update Nextcloud when core or -apps are touched

[Trigger]
Operation = Install
Operation = Upgrade
Type = Package
Target = nextcloud
Target = nextcloud-app-*

[Action]
Description = Updating Nextcloud installation
When = PostTransaction
Exec = /usr/bin/sh -c &amp;amp;amp;amp;amp;quot;/usr/bin/chown -R nextcloud:nextcloud /usr/share/webapps/nextcloud/apps &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; /usr/bin/sudo -u nextcloud /usr/bin/php /usr/share/webapps/nextcloud/occ app:enable twofactor_gateway audioplayer polls extract suspicious_login mail news calendar contacts keeweb deck onlyoffice bookmarks notes talk integration_github integration_twitter integration_reddit integration_discourse radio podcast&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
Nextcloud background job (cron)
&amp;amp;amp;amp;amp;lt;file -/etc/systemd/system/nextcloudcron.service&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Nextcloud cron.php job

[Service]
User=nextcloud
ExecStart=/usr/bin/php -f /usr/share/webapps/nextcloud/cron.php

[Install]
WantedBy=basic.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/nextcloudcron.timer&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Run Nextcloud cron.php every 15 minutes

[Timer]
OnBootSec=5min
OnUnitActiveSec=15min
Unit=nextcloudcron.service

[Install]
WantedBy=timers.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable --now nextcloudcron.timer
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Add additional mimetype for keeweb app
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
cd /usr/share/webapps/nextcloud
cp resources/config/mimetypemapping.dist.json config/mimetypemapping.json
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
add kdbx line to json config
&amp;amp;amp;amp;amp;lt;file - /usr/share/webapps/nextcloud/config/mimetypemapping.json&amp;amp;amp;amp;amp;gt;
[...]
        &amp;amp;amp;amp;amp;quot;_comment4&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;Any changes you make here will be overwritten on an update of Nextcloud&amp;amp;amp;amp;amp;quot;,
        &amp;amp;amp;amp;amp;quot;_comment5&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;Put any custom mappings in a new file mimetypemapping.json in the config/ folder of Nextcloud&amp;amp;amp;amp;amp;quot;,

&amp;amp;amp;amp;amp;quot;kdbx&amp;amp;amp;amp;amp;quot;: [&amp;amp;amp;amp;amp;quot;x-application/kdbx&amp;amp;amp;amp;amp;quot;],
        &amp;amp;amp;amp;amp;quot;3gp&amp;amp;amp;amp;amp;quot;: [&amp;amp;amp;amp;amp;quot;video/3gpp&amp;amp;amp;amp;amp;quot;],
        &amp;amp;amp;amp;amp;quot;7z&amp;amp;amp;amp;amp;quot;: [&amp;amp;amp;amp;amp;quot;application/x-7z-compressed&amp;amp;amp;amp;amp;quot;],
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
occ app:enable twofactor_gateway audioplayer polls extract suspicious_login mail news calendar contacts keeweb deck onlyoffice bookmarks notes talk integration_github integration_twitter integration_reddit integration_discourse radio podcast
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== mail ====
disable ssl verification of imap/smpt host
&amp;amp;amp;amp;amp;lt;file - /usr/share/webapps/nextcloud/config/config.php&amp;amp;amp;amp;amp;gt;
[...]
  'app.mail.verify-tls-peer' =&amp;amp;amp;amp;amp;gt; false,
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
==== twofactor_gateway ====
disposible phone number registration http://www.getsmscode.com
&amp;amp;amp;amp;amp;lt;file - /etc/webapps/signal-web-gateway/config.yml&amp;amp;amp;amp;amp;gt;
[...]
tel: &amp;amp;amp;amp;amp;quot;+1774****&amp;amp;amp;amp;amp;quot;
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
cd /usr/share/webapps/nextcloud
sudo -u http ./occ twofactorauth:gateway:configure signal # leave default options (press return)
cd /var/lib/signal-web-gateway
sudo -u signal signal-web-gateway # enter verification
systemctl enable --now signal-web-gateway
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
  * Activate 2FA in ''Settings -&amp;amp;amp;amp;amp;gt; Security (User)''
    * Enter your phone number and press verify

==== onlyoffice ====
  * Paste in ''Settings -&amp;amp;amp;amp;amp;gt; ONLYOFFICE'' the ''Document Editing Service address'' to ''https://office.project-insanity.org''
==== mantainance ====
Run file integrity checks
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo -u http /usr/share/webapps/nextcloud/occ integrity:check-app
sudo -u http /usr/share/webapps/nextcloud/occ integrity:check-core
sudo -u http /usr/share/webapps/nextcloud/occ files:scan --all
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
===== phpmyadmin =====
&amp;amp;amp;amp;amp;lt;file - /etc/webapps/phpmyadmin/config.inc.php&amp;amp;amp;amp;amp;gt;
[...]
/* Server parameters */
$cfg['Servers'][$i]['host'] = 'mysql.pi';
$cfg['Servers'][$i]['compress'] = false;
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;

===== cockpit =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S cockpit
systemctl enable --now cockpit pmcd
useradd -m cockpit
passwd cockpit
nft add rule inet filter input position 17 ip saddr 10.25.40.0/24 tcp dport 9090 accept
nft add rule inet filter input position 17 ip6 saddr 2a01:4f8:191:327::0/64 tcp dport 9090 accept
nft list ruleset &amp;amp;amp;amp;amp;gt; /etc/nftables.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/sudoers&amp;amp;amp;amp;amp;gt;
[...]
cockpit ALL=(ALL) ALL
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/pam.d/cockpit&amp;amp;amp;amp;amp;gt;
#%PAM-1.0

auth      required  pam_unix.so     try_first_pass nullok
auth      optional  pam_permit.so
auth      required  pam_env.so

account   required  pam_unix.so
account   optional  pam_permit.so
account   required  pam_time.so

password  required  pam_unix.so     try_first_pass nullok sha512 shadow
password  optional  pam_permit.so

session   required  pam_limits.so
session   required  pam_unix.so
session   optional  pam_permit.so
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;

===== outline =====
on http.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S outline
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/webapps/outline/.env&amp;amp;amp;amp;amp;gt;
[...]
SECRET_KEY=****
DATABASE_URL=postgres://outline:outline@mysql.pi:5432/outline
REDIS_URL=redis://localhost:6379
URL=http://playground.pi:3000
FORCE_HTTPS=false
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
on mysql.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo -i -u postgres psql -c &amp;amp;amp;amp;amp;quot;CREATE DATABASE outline;&amp;amp;amp;amp;amp;quot;
sudo -i -u postgres psql -c &amp;amp;amp;amp;amp;quot;CREATE USER outline WITH password 'outline';&amp;amp;amp;amp;amp;quot;
sudo -i -u postgres psql -c &amp;amp;amp;amp;amp;quot;GRANT ALL privileges ON DATABASE outline TO outline;&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
on http.pi
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
cd /usr/share/webapps/outline
npm run sequelize:migrate
systemctl enable --now outline
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;

====== storage.pi ======
===== kol ha campus archive radio stream =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S vlc pulseaudio
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/106fm_archive_stream.service&amp;amp;amp;amp;amp;gt;
[Unit]
Description=160fm.co.il archive radio stream server
After=network-online.target

[Service]
User=onny
Type=simple
ExecStart=/usr/bin/cvlc -A pulse,none /home/onny/bash-kolhaas-archive/archived --loop --random --sout-keep --sout '#transcode{acodec=opus}:duplicate{dst=display{delay=6000},dst=gather:std{mux=ffmpeg{mux=opus},dst=:8080,access=http},select=&amp;amp;amp;amp;amp;quot;novideo&amp;amp;amp;amp;amp;quot;}'
Restart=on-abort

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /usr/lib/systemd/system/pulseaudio.service&amp;amp;amp;amp;amp;gt;
[Unit]
Description=PulseAudio system server

[Service]
ExecStart=/usr/bin/pulseaudio --system --daemonize=no --disallow-exit --log-target=journal
ExecReload=/bin/kill -HUP $MAINPID

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /usr/share/dbus-1/system.d/pulseaudio.conf&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;?xml version=&amp;amp;amp;amp;amp;quot;1.0&amp;amp;amp;amp;amp;quot;?&amp;amp;amp;amp;amp;gt; &amp;amp;amp;amp;amp;lt;!--*-nxml-*--&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;!DOCTYPE busconfig PUBLIC &amp;amp;amp;amp;amp;quot;-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN&amp;amp;amp;amp;amp;quot;
 &amp;amp;amp;amp;amp;quot;http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd&amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;busconfig&amp;amp;amp;amp;amp;gt;
    &amp;amp;amp;amp;amp;lt;policy group=&amp;amp;amp;amp;amp;quot;pulse&amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;gt;
        &amp;amp;amp;amp;amp;lt;allow own=&amp;amp;amp;amp;amp;quot;org.pulseaudio.Server&amp;amp;amp;amp;amp;quot;/&amp;amp;amp;amp;amp;gt;
    &amp;amp;amp;amp;amp;lt;/policy&amp;amp;amp;amp;amp;gt;

&amp;amp;amp;amp;amp;lt;policy context=&amp;amp;amp;amp;amp;quot;default&amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;gt;
        &amp;amp;amp;amp;amp;lt;allow send_destination=&amp;amp;amp;amp;amp;quot;org.pulseaudio.Server&amp;amp;amp;amp;amp;quot;/&amp;amp;amp;amp;amp;gt;
        &amp;amp;amp;amp;amp;lt;allow receive_sender=&amp;amp;amp;amp;amp;quot;org.pulseaudio.Server&amp;amp;amp;amp;amp;quot;/&amp;amp;amp;amp;amp;gt;
    &amp;amp;amp;amp;amp;lt;/policy&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;/busconfig&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
echo &amp;amp;amp;amp;amp;quot;default-server = /var/run/pulse/native&amp;amp;amp;amp;amp;quot; &amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;gt; /etc/pulse/client.conf
echo &amp;amp;amp;amp;amp;quot;autospawn = no&amp;amp;amp;amp;amp;quot; &amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;gt; /etc/pulse/client.conf
systemctl daemon-reload
groupadd --system pulse
groupadd --system pulse-access
useradd --system -g pulse -G audio -d /var/run/pulse -m pulse
gpasswd -a onny audio,pulse-acces
systemctl enable --now pulseaudio 106fm_archive_stream
nft add rule inet filter input position 17 ip saddr 10.25.0.0/24 tcp dport 8080 accept
nft add rule inet filter input position 17 ip6 saddr 2a01:4f8:191:327::0/64 tcp dport 8080 accept
nft list ruleset &amp;amp;amp;amp;amp;gt; /etc/nftables.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
also added a caddy rule on http.pi for the url: https://blog.project-insanity.org/106fm
===== bitcoind =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S bitcoin-daemon
systemctl start bitcoind
systemctl enable bitcoind
ufw allow from 10.25.0.0/24 to any port 8333
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
https://bitcoin.stackexchange.com/a/75312
====== playground.pi ======
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S devtools
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
===== beta.saai.digital =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S iptables-nft
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/nftables.conf&amp;amp;amp;amp;amp;gt;
[...]
chain forward {
  type filter hook forward priority security; policy drop;
  mark 1 accept
[...]
table ip filter {
  chain DOCKER-USER {
    mark set 1
  }
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable --now docker
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
===== QuakeJS =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S quakejs-git
cd /usr/share/webapps/quakejs
chown -R quakejs:quakejs .
sudo -u quakejs node build/ioq3ded.js +set fs_game baseq3 +set dedicated 2
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/conf.d/quakejs&amp;amp;amp;amp;amp;gt;
QUAKEJS_DS_PARAMS=&amp;amp;amp;amp;amp;quot;+set fs_cdn cdn.quake.turbotux.de +set fs_game baseq3 +set dedicated 1 +exec server.cfg&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /usr/share/webapps/quakejs/base/baseq3/server.cfg&amp;amp;amp;amp;amp;gt;
seta sv_hostname &amp;amp;amp;amp;amp;quot;Project-Insanity.org QuakeJS&amp;amp;amp;amp;amp;quot;
seta sv_maxclients 12
seta g_motd &amp;amp;amp;amp;amp;quot;Welcome to PI Quake 3 battleground&amp;amp;amp;amp;amp;quot;
seta g_quadfactor 3
seta g_gametype 0
seta timelimit 15
seta fraglimit 25
seta g_weaponrespawn 3
seta g_inactivity 3000
seta g_forcerespawn 0
seta rconpassword &amp;amp;amp;amp;amp;quot;CHANGE_ME&amp;amp;amp;amp;amp;quot;
set d1 &amp;amp;amp;amp;amp;quot;map q3dm17 ; set nextmap vstr d2&amp;amp;amp;amp;amp;quot;
set d2 &amp;amp;amp;amp;amp;quot;map q3tourney3 ; set nextmap vstr d3&amp;amp;amp;amp;amp;quot;
set d3 &amp;amp;amp;amp;amp;quot;map q3tourney1 ; set nextmap vstr d1&amp;amp;amp;amp;amp;quot;
vstr d1
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/webapps/quakejs/web.json&amp;amp;amp;amp;amp;gt;
{ 
        &amp;amp;amp;amp;amp;quot;content&amp;amp;amp;amp;amp;quot;: &amp;amp;amp;amp;amp;quot;cdn.quake.turbotux.de&amp;amp;amp;amp;amp;quot;,
        &amp;amp;amp;amp;amp;quot;port&amp;amp;amp;amp;amp;quot;: 8081
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable --now quakejs-ds quakejs quakejs-cdn
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
===== PI ArchLinux Repository =====
build and install auruitls from source
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
cd /tmp
curl &amp;amp;amp;amp;amp;quot;https://aur.archlinux.org/cgit/aur.git/snapshot/aurutils.tar.gz&amp;amp;amp;amp;amp;quot; | tar xz
cd aurutils
gpg --recv-keys DBE7D3DD8C81D58D0A13D0E76BC26A17B9B7018A 
makepkg -i
pacman --root=/var/lib/aurbuild/x86_64/root -S git
pacman --root=/var/lib/aurbuild/x86_64/root -S python2-setuptools # workaround for zeronet -&amp;amp;amp;amp;amp;gt; python-pyelliptic
pacman --root=/var/lib/aurbuild/x86_64/root -S wayland # workaround for dmenu-wayland-git
sudo /usr/share/devtools/pacman-extra.conf /etc/aurutils/pacman-projectinsanity.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
configure custom repository
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.conf&amp;amp;amp;amp;amp;gt;
[...]
Include = /etc/pacman.d/projectinsanity
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.d/projectinsanity&amp;amp;amp;amp;amp;gt;
[options]
CacheDir = /var/cache/pacman/pkgwf
CacheDir = /var/cache/pacman/projectinsanity
CleanMethod = KeepCurrent

[aur]
SigLevel = Optional TrustAll
Server = file:///var/cache/pacman/projectinsanity
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/suders&amp;amp;amp;amp;amp;gt;
[...]
aur ALL = NOPASSWD: SETENV: /usr/bin/makechrootpkg
aur ALL = NOPASSWD: /usr/bin/arch-nspawn
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo useradd -m aur
sudo install -d /var/cache/pacman/projectinsanity -o aur
sudo repo-add /var/cache/pacman/projectinsanity/projectinsanity.db.tar
sudo chown -R aur:aur /var/cache/pacman/projectinsanity
sudo -u aur gpg --recv-keys 6BC26A17B9B7018A
sudo -u aur gpg --recv-keys 1D1F0DC78F173680
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/aurupdate.service&amp;amp;amp;amp;amp;gt;
[Unit]
 Description=Automatic update AUR repository.
 After=network-online.target

[Service]
 Type=simple
 User=aur
 ExecStart=/usr/bin/pi-archlinuxrepo-update.sh
 TimeoutStopSec=180
 KillMode=process
 KillSignal=SIGINT

[Install]
 WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /usr/bin/pi-archlinuxrepo-update.sh&amp;amp;amp;amp;amp;gt;
#!/bin/bash
for package in $(pacman -Sql projectinsanity) 
do
  aur sync --no-view -c $package
done
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/aurupdate.timer&amp;amp;amp;amp;amp;gt;
[Unit]
 Description=Automatic update AUR repository when booted up after 5 minutes then check for updates every 60 minutes.

[Timer]
 OnBootSec=5min
 OnUnitActiveSec=120min
 Unit=aurupdate.service

[Install]
 WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable --now aurupdate.timer
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo -u aur gpg --recv-keys 2A349DD577D586A5
sudo -u aur aur sync -d projectinsanity -c librewolf pkgbuild-introspection tor-browser-en r128gain split2flac id3ted redshift-wlr-gamma-control-git krop wcalc anbox-git ocenaudio-bin smloadr soulseekqt aurutils downgrade maddy wp-cli wordpress-plugin-antispam-bee wordpress-plugin-code-syntax-block wordpress-plugin-jetpack-lite wordpress-plugin-lightbox-photoswipe wordpress-plugin-wp-gdpr-compliance wordpress-plugin-wp-statistics jellyfin onlyoffice-documentserver nextcloud-app-twofactor-gateway nextcloud-app-audioplayer nextcloud-app-polls nextcloud-app-extract nextcloud-app-suspicious-login nextcloud-app-keeweb nextcloud-app-radio nextcloud-app-onlyoffice fdroidserver android-sdk android-sdk-build-tools gplaycli vlc-bittorrent qlcplus signal-web-gateway-git invoiceninja invoiceplane python-gspread-git etcher zeronet teamviewer scrcpy ttyd wdisplays-git dmenu-wayland-git python-soundcard python-soundfile pacaur archivemount micro python-rpi.gpio python-pad4pi python-pulse-control python-rplcd python-vlc python-mpv pmbootstrap wordpress-theme-geist linux-libre opensnitch-git powerpill osmctools tilemaker nextcloud-app-talk xerox-phaser-6000-6010 dokuwiki-plugin-captcha dokuwiki-plugin-dw2pdf dokuwiki-template-argon nextcloud-integration-github nextcloud-integration-twitter nextcloud-integration-reddit nextcloud-integration-discourse wordpress-plugin-opengraph nextcloud-app-podcast wordpress-plugin-simple-login-captcha wordpress-plugin-disable-xml-rpc wordpress-plugin-async-javascript wordpress-plugin-breeze wordpress-plugin-webp-converter-for-media
pacman -S caddy
gpasswd -a caddy http
systemctl enable --now caddy
nft add rule inet filter input position 17 ip saddr 10.25.0.0/24 tcp dport http accept
nft add rule inet filter input position 17 ip6 saddr 2a01:4f8:191:327::0/64 tcp dport http accept
nft list ruleset &amp;amp;amp;amp;amp;gt; /etc/nftables.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
caddy configuration
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/Caddyfile
import conf.d/*.conf
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/onny.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
http://onny.project-insanity.org {

log {
                output file     /var/log/caddy/onny.project-insanity.org.log
                format single_field common_log
        }

handle /archlinux {
        redir https://onny.project-insanity.org/archlinux/
    }

handle /archlinux/* {
        root * /var/cache/pacman/projectinsanity
        uri strip_prefix /archlinux
            file_server browse
    }

}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl restart caddy
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
caddy configuration on http-pub.pi:
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/onny.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
[...]
    proxy /archlinux playground.pi {
        transparent
    }
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl restart caddy
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
====== http-pub.pi ======
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S caddy php-fpm
systemctl enable --now caddy php-fpm
nft add rule inet filter input position 17 ip saddr 10.25.0.0/24 tcp dport http accept
nft add rule inet filter input position 17 ip6 saddr 2a01:4f8:191:327::0/64 tcp dport http accept
nft list ruleset &amp;amp;amp;amp;amp;gt; /etc/nftables.conf
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.d/hooks/php.hook&amp;amp;amp;amp;amp;gt;
# Restart php service

[Trigger]
Operation = Install
Operation = Upgrade
Type = Package
Target = php
Target = php-fpm

[Action]
Description = Restarting php service
When = PostTransaction
Exec = /usr/bin/systemctl restart php-fpm
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
custom caddy installation
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacaur -d caddy
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - ~/.cache/pacaur/caddy/PKGBUILD&amp;amp;amp;amp;amp;gt;
[...]
#    'http.expires'
    'http.filemanager'
#    'http.filter'
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
cd ~/.cache/pacaur/caddy
makepkg -i --skipinteg
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
===== caddy =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S caddy
gpasswd -a caddy http
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/Caddyfile&amp;amp;amp;amp;amp;gt;
import /etc/caddy/conf.d/*
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/ausstellung-virtuell.de.conf&amp;amp;amp;amp;amp;gt;
http://ausstellung-virtuell.de {
    redir https://www.ausstellung-virtuell.de{uri}
}

http://www.ausstellung-virtuell.de {

root    * /var/www/ausstellung-virtuell.de
        file_server
        log {
                output file     /var/log/caddy/ausstellung-virtuell.de.log
                format single_field common_log
        }

php_fastcgi unix//var/run/php-fpm/ausstellung-virtuell.de_php-fpm.sock

@mainpage {
          path_regexp path ^/([^.]+)$
        }
        rewrite @mainpage /index.php?page={http.regexp.path.1}
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/caddy/conf.d/onny.project-insanity.org.conf&amp;amp;amp;amp;amp;gt;
http://onny.project-insanity.org {

reverse_proxy /archlinux* playground.pi:80
        
        root    * /var/www/onny.project-insanity.org
        file_server
        log {
                output file     /var/log/caddy/onny.project-insanity.org.log
                format single_field common_log
        }

php_fastcgi unix//var/run/php-fpm/onny.project-insanity.org_php-fpm.sock

}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/caddy.service.d/overwride.conf&amp;amp;amp;amp;amp;gt;
[Service]
ProtectHome=false
LimitNOFILE=infinity
LimitNPROC=infinity
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl daemon-reload
systemctl restart caddy
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Overwrite php-fpm.service configuration, allow access to home directories:
&amp;amp;amp;amp;amp;lt;file - php-fpm.service.d/overwrite.conf&amp;amp;amp;amp;amp;gt;
[Service]
ProtectHome=false
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;

===== wordpress =====
&amp;amp;amp;amp;amp;lt;file - /etc/php/conf.d/wordpress.ini&amp;amp;amp;amp;amp;gt;
extension=mysqli

upload_max_filesize = 64M
post_max_size = 64M
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;

===== uwsgi =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S uwsgi-plugin-python python-bottle
mkdir /etc/uwsgi/systemd
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/uwsgi-private@.service&amp;amp;amp;amp;amp;gt;
[Unit]
Description=uWSGI service unit
After=syslog.target

[Service]
ExecStart=/usr/bin/uwsgi --ini /etc/uwsgi/%I.ini
Type=notify
SuccessExitStatus=15 17 29 30
NotifyAccess=all
KillSignal=SIGQUIT
PrivateDevices=yes
PrivateTmp=yes
ProtectSystem=full
CapabilityBoundingSet=CAP_SETGID CAP_SETUID
ReadWriteDirectories=${rw_directory}
ProtectHome=yes
NoNewPrivileges=yes
EnvironmentFile=/etc/uwsgi/systemd/%i.conf

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/uwsgi-private@.socket&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Socket for uWSGI %I

[Socket]
# Change this to your uwsgi application port or unix socket location
ListenStream=/run/uwsgi/%I.sock

[Install]
WantedBy=sockets.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
==== getmetadata ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S python-requests
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/uwsgi/getmetadata.ini&amp;amp;amp;amp;amp;gt;
[uwsgi]
http-socket = /run/uwsgi/%n.sock
uid = http
gid = http
chdir = /usr/share/webapps/getmetadata
master = true
plugins = python
file = streammetadata-api.py
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/uwsgi/systemd/getmetadata.conf&amp;amp;amp;amp;amp;gt;
rw_directory=&amp;amp;amp;amp;amp;quot;/usr/share/webapps/getmetadata&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable uwsgi-private@getmetadata
systemctl start uwsgi-private@getmetadata
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== biolaedle-etiketten-generator ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S python-pandas python-reportlab python-xlrd python-bottle
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/uwsgi/biolaedle-etiketten-generator.ini&amp;amp;amp;amp;amp;gt;
[uwsgi]
http-socket = /run/uwsgi/%n.sock
uid = http
gid = http
chdir = /usr/share/webapps/biolaedle-etiketten-generator
master = true
plugins = python
file = label.py
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable --now uwsgi@biolaedle\\x2detiketten\\x2dgenerator
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;

==== feeds ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S python-feedparser python-beautifulsoup4 python-pyrss2gen python-dateutil python-lxml
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/uwsgi/feeds.ini&amp;amp;amp;amp;amp;gt;
[uwsgi]
http-socket = /run/uwsgi/%n.sock
uid = http
gid = http
chdir = /usr/share/webapps/feeds
master = true
plugins = python
file = app.py
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/uwsgi/systemd/feeds.conf&amp;amp;amp;amp;amp;gt;
rw_directory=&amp;amp;amp;amp;amp;quot;/usr/share/webapps/feeds&amp;amp;amp;amp;amp;quot;
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable uwsgi-private@feeds
systemctl start uwsgi-private@feeds
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
==== pishare ====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S nodejs
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/uwsgi/pishare.ini&amp;amp;amp;amp;amp;gt;
[uwsgi] 
httpsocket = /run/uwsgi/%n.sock
uid = http
gid = http
chdir = /usr/share/webapps/pishare
master = true
threads = true
plugins = python
file = pishare.py
lazy-apps = true
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systenmctl enable --now uwsgi@pishare
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;

===== arch-upstream =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S python-progressbar python-jinja
ln -s /usr/share/webapps/arch-upstream /var/www/onny.sexypump.de/
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/arch-upstream.service&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Arch-Upstream

[Service]
Type=simp
User=http
Group=http
PrivateDevices=yes
PrivateTmp=yes
ProtectSystem=full
CapabilityBoundingSet=
ReadWriteDirectories=/usr/share/webapps/arch-upstream
ProtectHome=yes
NoNewPrivileges=yes
WorkingDirectory=/usr/share/webapps/arch-upstream
ExecStart=/usr/share/webapps/arch-upstream/main.py
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/arch-upstream.timer&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Run arch-upstream every 12 hours

[Timer]
# Time to wait after booting before we run first time
OnBootSec=10min
# Time between running each consecutive time
OnUnitActiveSec=12h
Unit=arch-upstream.service

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl enable arch-upstream.timer
systemctl start arch-upstream.timer
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
===== fdroid repo gplay mirror =====
http-pub.pi

enable multilib
&amp;amp;amp;amp;amp;lt;file - /etc/pacman.conf&amp;amp;amp;amp;amp;gt;
[...]
#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist

[multilib]
Include = /etc/pacman.d/mirrorlist

# An example of a custom package repository.  See the pacman manpage for
# tips on creating your own repositories.
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
pacman -S fdroidserver android-sdk android-sdk-build-tools gplaycli
cd www
mkdir fdroid
cd fdroid
env ANDROID_HOME=/opt/android-sdk fdroid init
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - www/fdroid/config.py&amp;amp;amp;amp;amp;gt;
[...]
repo_url = &amp;amp;amp;amp;amp;quot;https://onny.project-insanity.org/fdroid/repo&amp;amp;amp;amp;amp;quot;
repo_name = &amp;amp;amp;amp;amp;quot;Project-Insanity F-Droid repo&amp;amp;amp;amp;amp;quot;
repo_icon = &amp;amp;amp;amp;amp;quot;fdroid-icon.png&amp;amp;amp;amp;amp;quot;
repo_description = &amp;amp;amp;amp;amp;quot;This is a private F-Droid repository for the PI-crew :)&amp;amp;amp;amp;amp;quot;
[...]
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
env ANDROID_HOME=/opt/android-sdk fdroid update --create-metadata
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
mkdir ~/.config/gplaycli
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - ~/.config/gplaycli/gplaycli.conf&amp;amp;amp;amp;amp;gt;
[Credentials]
gmail_address=****@gmail.com
gmail_password=****
token=False
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - ~/.config/gplaycli/apk.list&amp;amp;amp;amp;amp;gt;
org.thoughtcrime.securesms
de.nextbike
com.spotify.music
com.mobiledirection.GPSRepairFix
com.melodis.midomiMusicIdentifier.freemium
com.whatsapp
de.hafas.android.db
de.regiorad.stuttgart
com.ebay.mobile
com.ebay.kleinanzeigen
com.comuto
org.jellyfin.mobile
com.bandcamp.android
com.cubic.cumo.android.kvv
com.moovel.kvv
com.supercell.boombeach
com.wahoofitness.boltcompanion
io.voiapp.voi
de.sdvrz.ihb.mobile.secureapp.sparda.produktion
com.valvesoftware.android.steam.community
com.aspiro.tidal
com.google.android.inputmethod.latin
deezer.android.app
org.mozilla.firefox
com.myunibo
de.thomastreyer.beonbike
de.gls.pure
de.gls.pure
org.lichess.mobileapp
com.zhiliaoapp.musically
com.lynxspa.prontotreno
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/gplaycli.service&amp;amp;amp;amp;amp;gt; 
[Unit]
Description=Gplaycli automatic APK mirror
After=network-online.target

[Service]
Type=simple
User=onny
ExecStart=/usr/bin/sh -c &amp;amp;amp;amp;amp;quot;rm -f /home/onny/.cache/gplaycli/token &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; /usr/bin/gplaycli -v -dc shamu --file /home/onny/.config/gplaycli/apk.list --folder /home/onny/www/fdroid/repo/ -c /home/onny/.config/gplaycli/gplaycli.conf &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; cd /home/onny/www/fdroid &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp; env ANDROID_HOME=/opt/android-sdk fdroid update --create-metadata&amp;amp;amp;amp;amp;quot;
TimeoutStopSec=180
KillMode=process
KillSignal=SIGINT

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/systemd/system/gplaycli.timer&amp;amp;amp;amp;amp;gt;
[Unit]
Description=Gplaycli automatic APK mirror

[Timer]
OnBootSec=5min
OnUnitActiveSec=12h
Unit=gplaycli.service

[Install]
WantedBy=multi-user.target
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl daemon-reload
systemctl --now enable gplaycli.timer
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Notes:
  * Manually put Threema apk into repo folder
===== public hosting =====
Create user for hosting site
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
useradd -m example
mkdir /home/example/www
ln -s /home/example/www /var/www/example.de
chmod +x /home/example
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Copy php-fpm profile
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
cp /etc/php/php-fpm.d/sexypump.de.conf /etc/php/php-fpm.d/example.com
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Replace all occurences from the domain (''sexypump.de'') and the user (''sexypump'') with your domain and user. Now restart ''php-fpm'':
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
systemctl restart php-fpm
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Create nginx webserver configuration:
&amp;amp;amp;amp;amp;lt;file - /etc/nginx/sites-available/example.de&amp;amp;amp;amp;amp;gt;
server {
    server_name example.de www.example.de;
    access_log /var/log/nginx/example.de.access.log;
    error_log /var/log/nginx/example.de.error.log;
    root /var/www/example.de/wordpress/;

location / {
        index index.php index.htm index.html;
    }

location ~ \.php$ {
        include fastcgi_params;
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        fastcgi_pass unix:/var/run/php-fpm/example.de_php.sock;
        fastcgi_index index.php;
        #fastcgi_split_path_info ^(.+\.php)(/.+)$;
        fastcgi_intercept_errors on;
    }
}
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
Enable webserver configuration:
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
ln -s /etc/nginx/sites-available/example.de /etc/nginx/sites-enabled/
systemctl restart nginx
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Enable SSL caddy proxy on ''http.pi''. Edit as user ''caddy'' and append following part:
&amp;amp;amp;amp;amp;lt;file - /opt/caddy/Caddyfile&amp;amp;amp;amp;amp;gt;
www.example.de example.de {
        log /var/log/caddy/example.de_access.log
        gzip
        tls crux@project-insanity.org
        proxy / http://http-pub.pi:80 {
                header_upstream Host {host}
                header_upstream X-Real-IP {remote}
                header_upstream X-Forwarded-Proto {scheme}
                header_downstream -Server &amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;quot;
        }      
} 
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
Restart caddy process after that. Depending on the permissions of your webroot, you can run:
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo gpasswd -a example http
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
Mysql database creation on ''mysql.pi'':
&amp;amp;amp;amp;amp;lt;code sql&amp;amp;amp;amp;amp;gt;
CREATE DATABASE IF NOT EXISTS sexypump;
GRANT ALL PRIVILEGES ON sexypump.* TO 'sexypump'@'http-pub' IDENTIFIED BY '****';
FLUSH PRIVILEGES;
&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;
&amp;amp;amp;amp;amp;lt;file - /etc/conf.d/ballisticc.de.ini&amp;amp;amp;amp;amp;gt;
upload_max_filesize = 1000M
post_max_size = 1000M
&amp;amp;amp;amp;amp;lt;/file&amp;amp;amp;amp;amp;gt;
===== podcast feeds =====
&amp;amp;amp;amp;amp;lt;code bash&amp;amp;amp;amp;amp;gt;
sudo cp /home/onny/www/laboumdeluxe/laboumdeluxe_* /etc/systemd/system/
sudo cp /home/onny/www/bounce/bounce_* /etc/systemd/system/
systemctl enable --now bounce_feed.timer laboumdeluxe_feed.timer kampus_hakatze_feed.timer

&amp;amp;amp;amp;amp;lt;/code&amp;amp;amp;amp;amp;gt;

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International