Project-Insanity

<code bash> git clone https://github.com/Sekilsgs2/i9100_kernel_mainline_port.git cd i9100_kernel_mainline_port export ARCH=arm export CROSS_COMPILE=arm-none-eabi- make i9100_defconfig make -j6 cat arch/arm/boot/zImage arch/arm/boot/dts/exynos4210-i9100.dtb > zimage mkimage -A arm -O linux -T kernel -C none -a 0x40008000 -e 0x40008000 -n Linux-android-sucks -d zimage boot.img make modules_install INSTALL_MOD_PATH=../ heimdall flash –RECOVERY boot.img </code>

<code bash> heimdall flash –FACTORYFS … </code>

• http://os.archlinuxarm.org/os/ArchLinuxARM-odroid-latest.tar.gz
• http://de4.mirror.archlinuxarm.org/os/ArchLinuxARM-armv7-latest.tar.gz

try <code bash> "console=ttyS0,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro no_console_suspend vdaccfg=0xa000 logo=osd" </code> <code> setenv loadaddr 0x70800000 setenv bootargs_mmc 'setenv bootargs ${bootargs} root=/dev/mmcblk0p1 ip=none rootfstype=ext4' setenv bootcmd_mmc 'run bootargs_base bootargs_mmc; mmc dev 0; mmc read ${loadaddr} 0x800 0x1800; bootm' setenv bootcmd 'run bootcmd_mmc' saveenv </code> <code> bootpart=1:1 devtype=mmc bootdir= bootfile=zImage bootpartition=mmcblk1p2 set_bootargs=setenv bootargs console=ttyO0,115200n8 root=/dev/${bootpartition} rw rootfstype=ext4 rootwait uenvcmd=run set_bootargs;run loadimage;run loadfdt;printenv bootargs;bootz ${loadaddr} - ${fdtaddr} </code> Next steps

• Move everything to local and make bash script flash.sh
  • https://github.com/postmarketOS/pmbootstrap/blob/master/aports/main/heimdall/heimdall_wait_for_device.sh
• try with mmcblk0p11 https://github.com/Sekilsgs2/i9100_kernel_mainline_port/issues/1#issuecomment-566525856
• uboot debugging, if mmc rescan https://archlinuxarm.org/forum/viewtopic.php?f=33&t=8292#p44462
• check archlinuxarm bootparams for uboot
• make serial access

<code> CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y CONFIG_USB_ETH_EEM=y </code> <file - /etc/systemd/network/usb0.network> [Match] Name=usb0

[Network] DNS=192.168.2.1 IPv6PrivacyExtensions=true

[Address] Address=192.168.7.18/30

[Route] Gateway=192.168.7.17 </file>

• https://wiki.postmarketos.org/wiki/Kernel_configuration#CONFIG_USB_ETH
• BCM4330 https://wiki.postmarketos.org/wiki/Samsung_Galaxy_SII_(samsung-i9100)#WiFi_.2F_Bluetooth_.2F_FM_radio
• https://archlinuxarm.org/packages/armv7h/firmware-brcm43xx
• micro-usb-usb-dongle keyboard :D
• https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_samsung/cm-14.1/i9100/proprietary/system/etc/wifi/nvram_net.txt
• https://github.com/respeaker/rkbin/raw/master/firmware/bluetooth/BCM4330B1.hcd
• http://mirror.archlinuxarm.org/aarch64/core/wireless-regdb-2019.06.03-2-any.pkg.tar.xz
• https://github.com/TheMuppets/proprietary_vendor_samsung/tree/lineage-17.0/i9100/proprietary/system/etc/wifi
• https://github.com/TheMuppets/proprietary_vendor_samsung/raw/lineage-17.0/i9100/proprietary/system/etc/wifi/bcmdhd_sta.bin as brcmfmac4330-sdio.bin

<code bash> pacman-key –init pacman-key –populate archlinuxarm </code>

• create package linux-firmware-samsung-i9100 or something
• use mainline kernel supplied by archlinuxarm, using dtb kernel boot args
• document everything we have so far
• iwd & sshd

<code bash> systemctl enable –now iwd systemd-networkd systemd-resolved sshd ln -sf /run/systemd/resolve/stub-resolv.conf /etc/resolv.conf </code> <file - /etc/systemd/network/wlan0.network> [Match] Name=< name of your wifi interface or * for every interface >

[Network] DHCP=yes IPv6PrivacyExtensions=true </file> <code> RFKILL=y CONFIG_KEY_DH_OPERATIONS=y </code> <code bash> dd of=archlinuxarm.img bs=1 seek=10G count=0 mkfs.ext4 -F archlinuxarm.img mount archlinuxarm.img arm-chroot pacman -S qemu-arm-static systemctl start systemd-binfmt wget "http://de4.mirror.archlinuxarm.org/os/ArchLinuxARM-armv7-latest.tar.gz" bsdtar -xpf ArchLinuxARM-armv7-latest.tar.gz -C arm-chroot arch-chroot arm-chroot # pacman-key –init # pacman-key –populate archlinuxarm # pacman -Syu base-devel </code> <code bash> pacman -S phosh gnome-session gnome-shell </code>

• check patched files by Sekilsgs2
• as i said before: start just phoc to get that running first: e.g. phoc -E 'weston-terminal' once that works you can then start phosh from that terminal and once that works bring gnome-session into the mix. that allows us to debug all parts independently.
• @lcd dts: flip-horizontal;, flip-vertical;

• https://github.com/u-boot/u-boot/releases?after=v2013.01-rc1
• https://github.com/u-boot/u-boot/archive/v2012.04.tar.gz

instructions for archlinux <code bash> git clone https://git.project-insanity.org/onny/i9100-uboot.git pacman -U i9100-uboot/dtc-1.4.1-1-x86_64.pkg.tar.xz i9100-uboot/gcc-arm-none-eabi-bin-49-4.9_2015_q3_update-3-x86_64.pkg.tar.xz wget "https://github.com/u-boot/u-boot/archive/v2012.04.tar.gz" tar xvf v2012.04.tar.gz cd u-boot-2012.04 patch -p1 -i ../i9100-uboot/i9100-uboot-2012.04.patch patch -p1 -i ../i9100-uboot/i9100-uboot-2012.04-bootarchlinux.patch export PATH="/usr/local/arm/gcc-arm-none-eabi-4_9-2015q3/bin:$PATH" export ARCH=arm export CROSS_COMPILE=arm-none-eabi- make galaxys2 ../i9100-uboot/flash.sh </code>

• https://github.com/u-boot/u-boot/archive/v2013.04.tar.gz

<code> boards.cfg drivers/misc/Makefile drivers/mmc/s5p_mmc.c (no file) </code> interessante datei in uboot upstream: include/configs/exynos5250-dt.h

• modifiziert
  • galaxys2.c
  • galaxys2.h

https://github.com/u-boot/u-boot/commits/master?after=d16e18ca6c4d81ac142acd529b1acb55b0c96dfc+45035 <code> git checkout 51bdad67cb6738c5d0e78084cf3e3baa216f4d2f </code>