Differences

This shows you the differences between two versions of the page.

--- st_lenovoideapad320server [2022/11/23 14:32] – 10.100.0.1
+++ st_lenovoideapad320server [2022/11/27 15:07] (current) – 10.100.0.1
@@ Line 8: / Line 8: @@
 Idle:3W
+***Software***
-Switch Off Backlit
+Debian
+static ip: /etc/network/interfaces
+iotStack purl script instalattion
-Sadly, the backlit of the display is not switching off, which leads to a broken display after a while and consumes additional energy. The simplest way to fix the issue was to change the consoleblank setting at boot. This did not need any additional packages like ACPI or any extra user scripts at startup.
+  /etc/systemd/logind.conf
+  HandleLidSwitch=ignore
+  HandleLidSwitchDocked=ignore
+  LidSwitchIgnoreInhibited=no
+  sudo service systemd-logind restart
+**Switch Off Backlit**
-Verify the value used at the moment with cat /sys/module/kernel/parameters/consoleblank. The value is in seconds. The easiest way to add the parameter at boot is using the kernel command-line.
+  https://www.feutl.com/blog/2020-01-29-switch-off-backlit-for-laptops-running-as-a-server
+  Verify the value used at the moment with cat /sys/module/kernel/parameters/consoleblank. The value is in seconds. The easiest way to add the parameter at boot is using the kernel command-line.
-    Open /etc/default/grub
+  Open /etc/default/grub
-    Add consoleblank=600 to the GRUB_CMDLINE_LINUX_DEFAULT= which sets the timeout to 10 minutes (600 seconds).
+  Add consoleblank=600 to the GRUB_CMDLINE_LINUX_DEFAULT= which sets the timeout to 10 minutes (600 seconds).
-        GRUB_CMDLINE_LINUX_DEFAULT="quiet consoleblank=0"
+  GRUB_CMDLINE_LINUX_DEFAULT="quiet consoleblank=0"
-    Run sudo update-grub, and reboot.
+  Run sudo update-grub, and reboot.